Question about 2007 Toyota Sequoia

Open Question

Back door power window inoperable, toyota technical service bulletin EL 007-06

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wiring for window on drivers side door

Registration is required... but I have used and referred a lot of happy users...
BBB Industries... Wiring diagrams & TSBs
(technical service bulletins)...

Happy hunting!

BBB Industries Premium Alternators Starters Power Steering Products

Nov 23, 2016 | 2000 Pontiac Bonneville

1 Answer

2003 expedition radio and Windows have power with key off and door opened

You are the 3rd person w the same problem. I would lean toward an electrical short in the ignition system wiring harness. They are very popular for that. Ask them of any recalls or technical service bulletins about this.Do you have any dome light , power window or power seat issues too? That's another popular one.Good luck

Sep 20, 2015 | Cars & Trucks

1 Answer

1996 ford explorer headlamp wiring

You can go to an get free wiring diagrams an TSB's Technical Service Bulletins Click on Technical Information then Technical Service Bulletins & Wiring Diagrams - Then you will see this END-USER LICENSE AGREEMENT , go to bottom of the page an click on I Agree next page you'll see this ..
  • TSBs
  • Wiring Diagrams
  • Search Technical Service Bulletins

    Year 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 Make Model System Subsystem

    ' Reset
    Powered by Longwood enter your vehicle info

    Jan 19, 2015 | 1996 Ford Explorer

    1 Answer

    2003 Toyota Echo will not communicate with inspection machine

    I know why. Toyota issued a technical service bulletin (TSB) dated September 8, 2003 applicable to all models, including yours. The bulletin specifies removal of the original DLC3 (OBDII connector cable) and installation of a controller area network (CAN) interface module. You may have to take your ECHO to a Toyota dealer to accomplish this.

    Mar 21, 2014 | 2003 Toyota ECHO

    1 Answer

    Landcruiser locks clicking, window operating intermittently

    First of all, just because Toyota "had" it for 4 hours, that doesn't mean they actually spent 4 hours checking the problem. If they actually charged you for 4 hours of labor and did not come up with a very reasonabe explanation of what they did or what they did or did not find, then I would have a serious problem with that.

    With that being said, there may be a Technical Service Bulletin (TSB) that may help to locate the cause of your problem. However, it is impossible to search for such a publication because you did not mention what model year your Land Cruiser is.

    Other than that, the only suggestions I can recommend is to check all of the power and ground circuits to both your door lock system and your power window system and your brake light circuits.
    I would also recommend a COMPLETE scan of your ENTIRE onboard computer network to look for any stored fault codes, as well as any network communication faults.

    Mar 16, 2012 | Cars & Trucks

    2 Answers

    El ploblema es que prende la luz de las mil y sale el codigo p2420 y p0441

    P0441 Evaporative Emission Control System Incorrect Purge Flow
    P2420 Evaporative Emission System Switching Valve Control Circuit High

    Ambos avisos estan referidos al sistema de emisiones y las valvulas de pruga que lo componen. Revisa alguna fuga en el canister, a veces un caniester defectuoso causa falla en las valvulas.

    Se pueden hacer unas pruebas inyectando gas a presion para detectar posibles fugas.

    Aqui hay un TSB (Technical Service Bulletin) referido a estas fallas, aplicable a ciertos modelos 2005.

    Espero haberlo ayudado (recuerda calificar esta ayuda) Buena suerte.

    Nov 26, 2009 | 2008 Toyota Yaris Sedan

    1 Answer

    Left power mirror replacement

    There is a Technical Service Bulletin on the power mirror actuator for replacement. If your mirror just stopped operating, I would take it back to the dealer and they will fix at no charge due to the TSB.

    For removing the door panel

    1. Remove window crank handle or power window switch assembly (if equipped).
      • Disconnect harness connectors.
    1. Remove pull handle escutcheon.
    2. Remove pull handle cover and remove screw.
    3. Lift armrest upward to release clips and remove armrest.
      • Remove front door finisher screws behind armrest.
    1. Release clips and remove front door finisher.
      • Disconnect lock cable and handle cable from inside door handle assembly.

    Feb 11, 2009 | 2007 Nissan Xterra Off Road

    1 Answer

    Rear Automatic Window

    Same problem, there is a small metal stopper that disables the window movement and depending upon the position of the window, will also disable the defroster and wiper. There is a service bulliten that describes a complete replacement of the window control (back door power window inoperable, toyota technical service bulletin EL 007-06). You only need to remove the stopper. follow the sections for that stopper removal. Took about half an hour. The new replacement motor and controller do not use the stopper.

    Oct 23, 2008 | 2006 Toyota Sequoia

    Not finding what you are looking for?
    2007 Toyota Sequoia Logo

    Related Topics:

    41 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toyota Experts


    Level 3 Expert

    75817 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8180 Answers

    Are you a Toyota Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides