Question about 1998 Mazda 323 1.3

Open Question

Locate reverse light switch on mazda 323 - 1998 Mazda 323 1.3

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Can not seem to losen nut on right front rotor 1994 mazda 323

The threds are standerd, I had to use a cheeter bar in order to get the nut to turn and then there is a threded hole next to one of the studs, useing a 12 MM course threded bolt screwed down into said threded hole the rotor came off as easy as can be.

Posted on Dec 29, 2008

  • 78936 Answers

SOURCE: where is the fuse located for reverse lights on a 2005 mazda trib

U most likely need a new backup light switch, it is screwed into the trans case, here is 18d41a7.jpga picture.

Posted on Mar 08, 2009

  • 484 Answers

SOURCE: 1992 mazda 323 Hatchback

Sounds (i can't know for sure unless i can test it) like a bad relay or a connection is broken. Have you checked underneath the hood in the fuse box in the engine bay?


Posted on Sep 15, 2009

  • 166 Answers

SOURCE: why is the automatic transmission

tranny is shot bad no good sorry

Posted on Dec 29, 2010

  • 5763 Answers

SOURCE: mazda 323 there seems to be no diffrence in air

The most common problem with ac is that the system is low on gas. this system is under high pressure and a certifeid ac tech should check it, if theres not enough oil in the system it will damge compressor or if to much or to little freon gas is in the system damage will occuralso in 1994 the gas used was R12 gas and the system may need to be switched to the new feron gas 134A.

Posted on Apr 08, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

One reverse light mazda

"Life wire??" I don't know what you mean.
Usually, the backup camera will derive its power from the positive lead of your backup lights, so that it only turns on when you're backing up. You can use a standard wire tap to derive positive (+) from either backup light, and use chassis ground for the negative (-) lead of the camera.

Apr 09, 2014 | 2003 Mazda 323

1 Answer

Reverse light

Reverse gearbox switch may be faulty.

Mar 26, 2014 | Mazda 323 Cars & Trucks

1 Answer

1989 mazda 323 overheating

Hi, There are a few I can think of-but the main problem for these mazda's to overheat is the temperature switch which runs the fan. It is located just below the thermostat housing and has a lead attach to it. If the switch is bad the fan will come on to cool things down. check that first!. Other items could be the thermostat might be stuck in the open or close position.
Good Luck!

Sep 27, 2011 | 1989 Mazda 323

1 Answer

1990 mazda 323 dash lights were intermittant now stoped working al together along with parkers

Instrument panel problem--possibly loose connection or poor ground--also have park light switch tested--may be worn out.

Feb 04, 2011 | 1992 Mazda 323

1 Answer

My resverse lights on my mazda 323 GLXi wont work Ive replaced bulb and checked fuses any other ideas?

There is a switch in the shifter that turns the reverse lights on when you put it in reverse. This switch is your problem.

Oct 20, 2010 | Mazda 323 Cars & Trucks

1 Answer

My 1992 mazda astina 323 pop up lights wont go back down. they turn on and off okay, but wont go down

You can check the switch first because there have 2 switches. 1 is open the pop up lights and another 1 is switch on the light. if the switch is functioning well then you must check with the motor which at the side of the light.

Jul 24, 2010 | 1990 Mazda 323

1 Answer

Reversing light not working

The reverse light switch needs replacement. You can purchase one from a mazda dealer for a cheap price. Unless you are hands on I recommend having replaced by a service centre.

Jul 28, 2009 | 1994 Mazda 323

2 Answers

Mazda 323 automatic

It sounds like you need to service the transmission,new filter and fluid should clear up this problem.

May 09, 2009 | 1986 Mazda 323

1 Answer

1994 Mazda "holding light" poroblem

i know its your ranny problem. clutches are burnt and need changing. it may be more guaranteed to get another tranny.

Dec 30, 2008 | 1994 Mazda 323

Not finding what you are looking for?
1998 Mazda 323 1.3 Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides