Question about 2006 Dodge Grand Caravan
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Usually there is a dot on the crank gear and one on the cam gear. Crank is up and cam is down but you still need to make sure you have TDC=top dead center
Posted on Mar 16, 2009
To align both sets of timing marks, turn engine crankshaft to the right with belt on cam and crank. Once you have done this the crankshaft alignment mark (on front of crankshaft gear) will line up with mark to the rear of gear on engine block.The two cam gear timing marks should be alines across from one another. The right cam gear is the intake side and the left side is the exhaust side. After removing the belt turn the exhaust cam down 1/2 notch. Timing mark on exhaust 1/2 notch down from the intake side. Install new belt and recheck everything to make sure it's all correct. Hope this will help you.
Posted on May 27, 2010
When it jumped timing, it's possible that the piston's hit the valves and they may be bent. Have a compression test done and see if you have cyclinder pressure.
Posted on Nov 12, 2010
Tips for a great answer:
Jan 07, 2014 | Cars & Trucks
Dec 28, 2013 | 2005 Dodge Caravan
Jan 20, 2012 | Dodge Caravan Cars & Trucks
Feb 11, 2011 | 1997 Dodge Grand Caravan
Jan 22, 2011 | 1995 Dodge Caravan
Nov 11, 2010 | 1996 Dodge Caravan
Sep 06, 2010 | 2004 Dodge Caravan
May 16, 2010 | 2000 Dodge Caravan
Jul 13, 2009 | 2005 Dodge Caravan
Sep 27, 2008 | 1996 Dodge Caravan
Jun 23, 2017 | 2006 Dodge Grand Caravan
216 people viewed this question
Usually answered in minutes!