Question about 2004 Chevrolet Tahoe

Open Question

Removing windshield washer nozzle on toyota highlander

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I adjust the windshield washer nozzles/


Just bend the nozzles up a little, without putting a kink in the line.

Jan 31, 2013 | 2011 Toyota Camry

1 Answer

How to repair/replace windshield washer nozzle jet in 2007 Toyota Camry


Before you do that first try cleaning the jet (small hole) with a fine wire . A good place to get thin wire is from an old piece of lamp flex.

You could also try detaching the plastic tube from the back of the nozzle, under the hood, and then blowing compressed air at the hole on the outside.

Oct 07, 2012 | 2007 Toyota Camry

1 Answer

WINDSHIELD WASHER FLUID IS NOT WORKING


lets start with the basics. check your owners manual for the location of the fuse or relay, and mke sure thats good. if its bad, replace it. if its good, then get a safety pin( trust me), and go to where the spray nozzle is( where fluid comes out to spray on the windshield) and stick the point of the pin in the nozzle end( they do clog up from dirt and dust from the road). now try it. works, great, if not. then lets move on to the line. undo the line (rubber hose) at the back of the nozzle, and try it. if fluid comes out of the line, then you need a can of compressed air(any office supply store) and really blow out the nozzles. if no fluid then reconnect the line and go to the reservoir. undo the line at the pump motor, and try it, if it works, then you will need to replace the rubber line. if it does not work, sorry to say you have to pull the reservoir, and replace the motor. you and a friend can do these checks in about 10 minutes. This is how we test at the body shop. hope this helps, and please rate

Jan 29, 2011 | 2002 Toyota Highlander

2 Answers

Where is the windshield washer motor?


it is connected to the bottom of the windshield washer reservoir... under the hood.

Sep 29, 2010 | 1997 Toyota Celica

1 Answer

2003 TOYOTA WINDSHIELD WIPER SPRAYER NOT WORKING


The pump is located in the washer fluid bottle. Can you hear the pump go on. If you can then it's possible that the nozzles are clogged. You can also inspect the lines for the nozzles on the hood back to the washer fluid bottle.

If the pump does not go on then check the fuse in the junction box in the engine compartment. Good Luck

Jun 11, 2010 | 2003 Toyota Highlander

1 Answer

How to remove windshield wiper arms on a 2008 toyota highlander


Front are standard clipon 26 inch and 20 inch. rear needs to be replaced by dealer.

May 20, 2010 | 2008 Toyota Highlander

1 Answer

How do you remove a rear windshield wiper blade from a Toyota Highlander year 2008


This is a dealer only change. front are standard 26 and 20 inch clip on

May 07, 2010 | 2008 Toyota Highlander

2 Answers

Windshield washer not working. Have filled it several times but water level goes down when operated but does not come out of nozzle.


Check the hose from the container to the wipers and see if it came disconnected from either place and check for a broken or cracked hose.

Dec 20, 2009 | 2003 Toyota Corolla

Not finding what you are looking for?
2004 Chevrolet Tahoe Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...