Question about Isuzu Rodeo
Here is a photo of the obd connector on a 1993 Isuzu Trooper.
The connector is on the transmission hump about 6 inches from the accelerator pedal. It is inside a black hood. Right next to the white OBD connector is an identical green connector that I have not tested.
The OBD port is a white 3 hole plug. Right next to it in the photo is a green 3 hole plug that I believe is for automatic transmission diagnostics. The plug is different from other plugs under the dash as it will not accept a .25" tab connector.
The picture shows a 20 ohm resistor being used to short pin 1 and 3 of the white plug. The resistor is to prevent a melted wire in case the plug shorted is the wrong plug.
To read the error codes from the engine computer, the mechanic is supposed to short pin 1 and pin 3 of the OBD port plug. Then the mechanic turns on the ignition switch and counts flashes of the "check engine" light to determine the error values being reported.
Posted on Sep 20, 2009
It should be Right up under the Dash on the Left of the Steering Column.
Posted on Jan 23, 2009
SOURCE: where is the obd connector
maybe on a hump in front of the console, on the drivers side and may be covered with carpet. Or near the drivers left foot rest and drivers door underneath some plastic.
Posted on May 02, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 26, 2015 | Isuzu Cars & Trucks
Aug 26, 2014 | 1993 Isuzu Rodeo
May 02, 2011 | 1995 Isuzu Rodeo
Jul 01, 2010 | 1995 Isuzu Rodeo
Oct 07, 2009 | 1998 Isuzu Rodeo
Jun 27, 2009 | 1995 Isuzu Rodeo
6,004 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: