Question about 2008 Nissan Versa

1 Answer

2008 nissan versa right headligh low and high filement on on low and nothing on high

My aunts 2008 Nissan Versa has both filaments on in the right headlight when on low and nothing when on high but the left works just fine. I put in a new bulb and it did the same thing. Checked both fuses for right bulb and nothing. My only guess would be that there is something wrong in the switch on the wheel? Any advice would be great! Thanks! -Mitch

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 165 Answers

Check the wireing that the bulb goes into probley theres a faulty or loosened 1 : )

Posted on Jan 14, 2013

  • mitchhimes Jan 15, 2013

    Just where the bulb plugs into or the whole set of wires from the light to the relay and switch?

  • FRANK Jan 15, 2013

    just on the bulb itself if that doesnt work or doesnt look right make sure they gave u the right bulb ,if thats not the problem just follow the wires from the bulb holder itself and u might find a defaut wire ,easest thing to do is go to your nearest junk yard and cut the wires to the bulb holder and just replace it with sume electricol tape : )

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
knotbeerdan
  • 413 Answers

SOURCE: 2008 Nissan Versa Instrument Panel Lights

did you check and see if they are set all the way to dim?

Posted on Dec 24, 2008

  • 1 Answer

SOURCE: 95 pathfinder only 1 headlight comes on both bulbs good

im a mechanic who owns a1995 pathfinder, had the same problem.your trouble is in your daytime running light module. try giving it a tap, bet they will come back on

Posted on Feb 07, 2009

  • 389 Answers

SOURCE: For 2009 Nissan Versa SL: Need to Disable Dashboard Lights

There may be a seperate fuse for that feature. The thing to try is find the fuse box. It is generally under the left hand side of the dash on thedriverside butthey have been known in some vehicles to be on the right hand side under the dash and even inside the glove compartment. There are some models that setup the fuse box under the hood as well. If you have an operating manual with your vehicle then the fuse box will be located in there.
Once you find the fuse box then try thist rick.
Locate instrument panel fuse. In this case there should be two with instrument panel listed but if not then it may be all in one fuse. What I woulddo is just turn thekey on so the lights you want off are shinning on so you can see them. Then one by one pull a fuse. If thelight stays on then replace the fuse back in the same spot you took it out of, Continue doing this one fuse at a time and replacing it back in the same spot until the dash lights go out. Then see what the fuse box says about that certain fuse and what all it operates. It may be that you can not disable the dash lights this way without disabling something else you need such as a blinker or heater or radio, but what I am hoping is it has its own seperate fuse. If you arenot sure what it operates by what it says onthe fuse box then once the fuse is out start the car and check all of your other lights including brake lights and blinkers and of course thedash lights that work when your head lights are on. Check all of yourother switch operated devices like the radio and windsheild wipers and heater. Anything that has a switch you can test. Remeber that you may have pulled the fuse that operates the dashlights but there still may be another fuse that operates the dashlights you want disabled, so if the fuse you puilled disabled stuff youneed then replace thefuse and keep pulling more until the dashlights go out again or you run out of fuses to pull. Remeber to turn the headlights back off while you arepulling more fuses. I hope this was helpful, Raz

Posted on Apr 15, 2010

Testimonial: "That's a great approach. However, my Versa has a minimal number of multi-purpose fuses - none of which refer to the dash cluster. Thanks, anyways!"

  • 1 Answer

SOURCE: how to change a headlight on nissan versa 2007

How to change a headlight on Nissan Versa 2007. Open the hood, pull the power cable off of the headlight. Peel off the large black rubber cover. There is a metal clip you must push in and then out to unclip. The bulb will then slide out for replacement.

Posted on Jun 15, 2010

  • 143 Answers

SOURCE: My nissan versa hatchback standard

you need to check the switching the switching usually comes from the park pawl asm which is found at the shifter rod on the gearbox. the terminals will be corroded inside

Posted on Oct 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing tensioner assembly


images for 2008 Nissan Versa Removing tensioner

    how do you remove tension off surpentine belt tensioner - Nissan Forum

    www.nissanforums.com/.../151350-how-do-you-remove-tension-off.htm...

    Feb 20, 2009 - 4 posts - ‎2 authors
    2008+ Nissan Rogue ... QR25 2.5L Engine Engine Discussion: 2002+ Sentra SE-R and SpecV ... how do you remove tension off surpentine belt tensioner ... changed these before, but which way do you turn the tensioner, how ... Replacing the Water Pump on a '04-'08 Maxima *DIY*
    1 post
    Aug 31, 2011
    Belt noise: replace idler pulley? - GA16DE
    8 posts
    Sep 16, 2008
    Step by step instructions -Upper Timing Chain Tensioner
    15 posts
    Dec 8, 2007
    Idler Pulley Bearing Replacement Info
    5 posts
    May 16, 2003
    More results from www.nissanforums.com

    Nissan Versa Tensioner Pulley Issue (1/1) - EricTheCarGuy ...

    www.ericthecarguy.com/.../50669-nissan-versa-tensioner-pulley-issue
    Nissan Versa Tensioner Pulley Issue 1 year 7 months ago #94552 ... for a 50 Torx to be used to remove the entire tensioner pulley assembly but all of my 50Trx

    How to Replace serpentine belt 2008 Nissan Altima ...

    ? 11:29
    https://www.youtube.com/watch?v=5NchA85pnAE
    Jul 2, 2014 - Uploaded by nivekoch
    How to Replace serpentine belt 2008 Nissan Altima In this video i'll be going ... 2005 Nissan Altima 2.5L serpentine belt tensionerreplacement ...

Dec 16, 2015 | 2008 Nissan Versa

1 Answer

What is the code for a nissan versa 2011 car radio please and thanks


Hi Ryan,
It's highly unlikely that you'll get a code this way. Your best bet is to contact Nissan customer support. However, you could try searching online for "code for nissan versa radio". I got several hits, the most interesting was a Nissan forum.

http://forums.nicoclub.com/help-versa-radior-wire-codes

Jul 26, 2015 | Nissan Cars & Trucks

1 Answer

2008 Nissan Versa.....the heater fan keeps cutting out


THE FAN IGNITIOR MIGHT OF WENT OUT CHECK IT AND TEST IT IT ALSO COULD BE THE RELAY SYSTEM SWITCH

Jan 23, 2012 | 2008 Nissan Versa

1 Answer

How do iI change 2008 nissan versa sprkplug


You must remove intake manifold ( make sure you replace gaskets) remove coils and remove spark plugs denso iridium tipped plugs are the recommended plugs to go with

Aug 04, 2011 | 2008 Nissan Versa

1 Answer

How do I change the spark plugs on my 2008 Nissan Versa?


No answer here. Looks like you have to remove the intake manifold (5- 10mm bolts in front, on the rear at the throttle body, it looks like connect from air intake snorkel, remove snorkel and take out the bolt on the other side to get to the plugs. This POS site tells you nothing useful.

Feb 14, 2011 | 2008 Nissan Versa

2 Answers

How to reset 2008 nissan versa low tire pressure light


make sure that you have 36psi of pressure in ALL 4 TIRES. then drive vehicle for about 2 miles or less at at least 35mph and if all is ok,(sensors are ok) than the light will go out by it self.

Dec 21, 2010 | 2008 Nissan Versa

1 Answer

Nissan versa heater fan removal ,mice nest in heater box, need to clean. how do i remove the box/or fan


2008 nissan versa mice nest in heater fan box. how do i remove heater fan blower?

Jul 14, 2010 | 2008 Nissan Versa

1 Answer

I was told my nissan versa had no trans fluid in it


try having the transmission flushed to make sure all the wrong fluid is out and it should be fine

Apr 11, 2009 | 2008 Nissan Versa

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...