They go bad after so many miles so its better to go ahead and replace it : )
SOURCE: Manifold Absolute Pressure sensor location Ford Explorer
There isn't one. It uses a MAF (mass airflow) sensor.
SOURCE: Replacing a 1991 cadillac sedan deville air compressor
The lines should be differant sizes.. Did you check it? Ther should be a diagram on the cover over your radiator showing you the set up.. Hope this helps..
SOURCE: MY VW POLO SHOWS FAULT CODE ; P0106 ABSOLUTE MANIFOLD PRESSURE SE
this a map sensor, probably just need the sensor replaced, it measurese intake vaccum and adjusts air/fuel mixture accordingly
Testimonial: "MANY THANKS TO HONDABOY 47. SPOT - ON. PROBLEM SOLVED!"
SOURCE: I can not find the manifold absolute sensor on
Likely mounted between the valve covers and the carb/throttle body on the passinger side of engine.One vacum hose and a three wire harness.Two mounting screws.Probibly mounted on a metal bracket with several other things packed on as well.
SOURCE: have a 2005 cadillac deville, get error code
the mapp & barometric sensors aren't doing the job in performing the correct mixture of hydrocarbons to pass through your exhaust
5.7L Engine
The Manifold Absolute Pressure (MAP) Sensor is mounted in the rear of the intake manifold.***** you didn't tell me what motor you have so here are all of them on4.6L&6.0L its mounted in the front of the intake manifold behind the throttle body on the 5.7L its mounted in the rear of the intake manifold
41 views
Usually answered in minutes!
×