Matiz 2001 indicators and hazard lights stopped working anyone know which fuse box and which fuse please?

Check the fuse labelled "hazard"". If OK then change the hazard switch. The switch not only turns on all signal lights but also switchover from hazard to turn signal. Usually both circuits uses the same flasher relay.

All except the brakes sound like fuses failing, or wires breaking. A quick check of the fuse box should remedy those.

What do you mean by "the brakes"?

does the pedal go to the floor without stopping the truck?
do the brake lights not come on?
is the brake indicator on the dash on?

need a little more to go on

try changing ur flasher unit also located on ur fuse box

flasher relay is usually under the hood. Look for a black plastic box near the fender

asked aa man also if four ways work and flashers dont its a fuse box is at side of accelarator under dash on 2001 model

Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

If both indicators and hazard lights are not working, probably the indicator relay is broken.
Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver.
Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A.
Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like
a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!

first has it got code number, if so put it in. second try testing your radio out on battery, if it good check acc. fuse.

Sounds like the flasher(which is your hazard switch) is failing.