Question about 1999 Toyota RAV4

Open Question

TOYOTA RAV4 LIMITED 2007 TIMING BELT

DOES THE 2007 HAVE A TIMING BELT

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Mike258
  • 1498 Answers

SOURCE: Serpentine Belt Toyota Rav4

Hi maroon,

  • Get a 14mm or 9/16" socket and a long handled ratchet or breaker bar.
  • Get the belt around all the pulleys except the A/C compressor or Alternator. Double check your routing.
  • The tensioner pulley is on a spring loaded arm. Get your socket on the center nut of this pulley.
  • Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to get the belt on the final pulley.
  • Slowly release the tension.
  • You're done
Mike

Posted on Dec 14, 2008

Ad
stevehinrich
  • 61 Answers

SOURCE: Timing Belt broke while driving my 96 Toyota Rav4,

Zero tolerance means the valves may have hit the piston when the timing belt broke. I would suggest doing a cylinder leakage test to see if the valves are bent or not. If the valves are not bent then you can replace the belt and everything will be ok. If there are bent valves then the cylinder heads will need to be removed and repaired.

Posted on Mar 03, 2009

  • 37 Answers

SOURCE: diagram 2003 toyota rav4 serpitine belt routing

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?partName=Engine+Mechanical&pageId=0900c1528019c35b&partId=0900c1528019c35b

go here i think this will help

Posted on Apr 20, 2009

  • 1 Answer

SOURCE: how to find timing belts marks toyota rav4 2l

I have just replaced my water pump on my 1998 RAVE4, also, the timing belt and the other two belts. I had a tough time with the timing marks. The way you line these marks up is easy if you take the time, First, if you are changing the timing belt you pull the balancer and both top and bottom plastic covers,(do not try to pull top cover off before you take off balencer and the motor mount off or you will just break it.), Second after covers are removed you will have access to the timing belt, you can now remove it by loosening the tensioner bolt and pushing down on the tensioner wheel, the belt then can be taken off. Third take out number one sparkplug and replace the bottom cover by maybe two bolts so that you can see marks on cover, next replace the balancer and bolt. Turn the motor over by hand with the balancer so the small divit on the back of the balancer is on 0 or top dead center on the compression stroke, you can use a compression gauge for this or I just used a mirror and light to shine in the number one cylinder to see the piston. Next remove the balancer and cover and make sure to make a mark on crankshaft gear and housing. Next you will need mirror and flashlight, now turn camshaft gear clockwise to line the hole in the gear with the top timing mark. I recommend a small circle mirror for this. Now replace the belt. I turned the crank shaft gear one tooth counter clockwise off mark and the camshaft one tooth clock wise off mark so when the belt is on you can turn the camshaft gear counter clockwise to get tension on the belt and marks will line up. I would recommend changing water pump,tensioner wheel, and the idler wheel. After belt is on I would replace the bottom cover the balancer and the crankshaft sensor. Iwould then start it to make sure the water pump is not leaking and the motor is not pinging or you will have to tear it back apart again. Good luck and no I am not a certified mechanic just thought this would be helpful from my own experience.

Posted on Apr 30, 2009

matney68
  • 426 Answers

SOURCE: toyota 4runner timing belt or chain?

60000 or 48 months on belt which is used on the 5VZ-FE motor. The 2RZ-FE and 3RZFE are chain and there is no clear information about changeing them as a maintenence. i hope this helps.

Posted on Nov 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is a 1997 toyota rav4 2.0 liter a non-interference engine?


It's a non - interference engine, you should be right with a new timing belt.

Mar 27, 2016 | 1997 Toyota RAV4

2 Answers

How do you align the timing chain correctly for a 2004 Toyota Rav4 with a 2.4 engine?


be careful - that is not an easy job.....
if done wrong the engine will be busted....
better let a toyota-shop do that if you are not a mechanic
sample: 2000 Toyota RAV4 Serpentine Belt Routing and Timing Belt Diagrams
25439674-dtj5krvtgjoqdjoc5b0bl5xd-2-0.jpg

25439674-dtj5krvtgjoqdjoc5b0bl5xd-2-2.jpg

Feb 17, 2015 | 2004 Toyota RAV4

1 Answer

Cant find the timing mark after timing belt was cut, 1991 BMW 318i E36


is this an engine swap? a fraken Toyota?

roblem with 2000 Toyota RAV4 Cant find the timing mark after timing belt was cut, 1991 BMW 318i E36

Dec 08, 2013 | 2000 Toyota RAV4

1 Answer

I want a service manual for a 2007 rav4 limited (6-cyl)


http://www.toyota.com/owners

Navigate to "Manuals" in the top bracket

Mar 17, 2011 | 2007 Toyota RAV4

1 Answer

I replaced the timing belt on my 1999 toyota Rav4 and I want to setthe timing. Will you assist me to reset the timing properly?


The timing is not likely adjustable. Assuming the belt was put in correctly and everythiing was lined up perfectly , it should be good to go.

Feb 14, 2011 | 1999 Toyota RAV4

1 Answer

I have a Toyota Rav4 2007 with 60000miles when should I change my timing belt ?


For safety at 62000 miles but if still original than at 65000miles, most people get them done at 55000-60000 so it is easy to remember.

Jan 27, 2011 | 2007 Toyota RAV4

1 Answer

Hey the water pump just went in my 1998 toyota rav4 2litre. how do i go about replacing it ? i cant find anywhere on here


Your water pump is driven by your timing belt, can not be seen with out remove timing belt cover, to replace you will also have to remove timing belt, if timing belt has not been replace best to replace it now also, timing belt should be replace every 60,000 miles. make sure before removing timing belt that you mark where all pulley gear's are at, so when you install the timing belt back on there in the same place as before you move the timing belt, no need to mark water pump gear,good luck,hope this was very helpful.

May 13, 2010 | 1998 Toyota RAV4

1 Answer

2007 Toyota RAV4 DRL out - which fuse?


My 2007 RAV4 Limited DRLs are the regular hi beams running at what looks like 1/2 voltage (6V?). I've installed an HID system for the lo beams and would like to do the same for the hi beams but don't see how would work with the stock DRL system.

Jul 02, 2009 | Toyota RAV4 Cars & Trucks

1 Answer

Need timing specs. 1997 toyota rav4


Chuck give toyota parts dept a call the can fax or print you a copy for your file make sure you have your vin available

Jan 27, 2009 | 1997 Toyota RAV4

Not finding what you are looking for?
1999 Toyota RAV4 Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...