Question about Infiniti I35

1 Answer

2002 infinity i35 will not crank or turn over, yet dash lights work

I have a 2002 Infinity I35. The car will not start or even attempt to crank or turn over. All the lights come on in the dash as well as externally. We had the battery and the alternators tested at our local shop and both are perfectly fine. We were told that maybe its the ignition switch. Anyone have any ideas, or can someone please tell me where to locate the ignition/kill switch on my car? Thank you :)

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Infiniti Master
  • 35,531 Answers

The ignition switch could be defective but you don't mention in your narrative whether you had the starter checked

Posted on Jan 14, 2013

  • Becky Medina Jan 14, 2013

    Yes im sorry, the starter was checked as well and was given the OK



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 i35 infinity will not go past 2200 rpm

Might change the fuel filter. It might not be allowing enough fuel to the engine.

Aug 08, 2016 | 2003 Infiniti I35

1 Answer

I have a 2002 infiniti i35 and my question is. I turn the key all the way as if I were to turn it on and it only makes a clicking sound. It doesn't even make a sound like it tries to turn on. Help me

The clicking noise is either the start relay or the starter solenoid attempting to engage. The first thing to suspect when this happens is either a bad battery or loose battery connection. Turn on the interior light when you turn the key. If the light dims slightly when cranking, the battery is probably OK. If it blinks on and off with the clicking or goes out completely, your battery is probably toast. The other likely possibility is a bad starter.

Sep 16, 2015 | Infiniti Cars & Trucks

1 Answer

My car keeps making a clicking sound when I try to start it, eventually it will start but later on it will do the same thing. I have i35 2002. Brand new alternator so I dnt understand what's goin on!

If its a single click every time you turn the key to the crank position you need a starter.

If its a series of clicks when you hold the key in the crank position you need a battery.

Sep 28, 2011 | 2004 Infiniti I35

2 Answers

How do i replace the camshaft position sensor on a 2004 infiniti i35

hi, i have infinity fx 35 2003 it light on the service engine camshaft position sensor bank 1 , i replaced the bank 1 after 3 hour it light on again service engine + VDC off and slip i put the scanner it told me camshaft position sensor bank 1 again what can i do ?

Jul 24, 2010 | 2004 Infiniti I35

1 Answer

How do I replace my cam sensors and crank sensor in my 2002 Infiniti I35. I have an 02, not an 04

simple check to see if is the bank 1 or bank 2 cam sensor
do you a code for cam sensor

Apr 26, 2010 | 2004 Infiniti I35

1 Answer

Is premium unleaded gasoline used in an infiniti I 35

Yes you can use Premium Unleaded Gasoline in your 2004 Infinity I35. Infinity actually recommends Premium grade gasoline for your car!

Oct 20, 2009 | 2004 Infiniti I35

1 Answer

How to program 2002 i35 infiniti keyless remote?

The procedure goes like this. First get in the car and lock all the doors. Secondly insert and remove the key repeatedly until the turn signal indicators on the dash flash twice simultaneously, it should be like seven or eight times. Then turn the key on and press the lock button on the remote and the lights should flash again. After that turn the key off and manually unlock and open the drivers door, then shut it. Wait a few seconds then try the remote. 

Apr 28, 2009 | 2004 Infiniti I35

1 Answer

Put new rear rotors and pads on my 2002 I35 Infinity, now have very weak pedal , have to pump the brakes in order to stop, doesn't maintain pressure.

Doesn't sound like the brake lines were bled properly. Many times after pad and rotor installation if the lines are bled correctly you will have to pump them initially after the repair for a couple of minutes until the pressure is built back up. Also check the master cylinder and make sure fluid level is ok.

Apr 13, 2009 | 2004 Infiniti I35

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14378 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides