Question about 2005 Lincoln Aviator

2 Answers

Heated / cooled seats on the passenger side is not working. The lights on the switch will come on for about 60 seconds and then turn off. If you press the switch again nothing happens.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

If the fuse checks out, follow the instructions to Depower & Repower the Supplemental Restraint System. This will cause the system to recognize the climate controlled seats. Here's the link:
http://iihs.net/fsm/?dir=488&viewfile=Supplemental Restraint System (SRS) Depowering and Repowering.pdf

Posted on May 03, 2016

Need a scan tool & factory diagnostic manuals to work on the
seats & the heat.

Could be about eight different things

Could be a under seat blower motor

Nothing you can do or most shops will touch,
unfortunately a dealer doesn't work on them
either,but they have a outside seat person come
in after the service bays close at night to do seats

Posted on Jan 16, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: My heated/air cooled seats do not work

You may try cleaning the filters and checking for loose connections. Heat and cooling filters should be changed or cleaned with some regularity. Like an air conditioner, these things require maintenance that are often overlooked.

Posted on Jan 16, 2009

  • 375 Answers

SOURCE: lincoln blackwood climate control

have had my drive seat fixed 3 times and is being repair as we speak for the fourth. Passenger side I had repaired once and it is out now also. I love my Navie, but the seat accessories are junk. I too, have a 2000. If you can bear with me for about a week, I will know why these are not working and will be able to follow up with you about yours first hand instead of guessing. Fair enough?

Posted on May 14, 2008

  • 94 Answers

SOURCE: heated and cooled seats quit working. won't work on either driver's or passanger's seats. checked the fuses and relays and they are all ok. what's wrong?

Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.

Posted on Jul 03, 2009

  • 1 Answer

SOURCE: heated seats in my 2004 navigator are not working

if the light doesnt come on for the heated seat, *sometimes* the electronics need to be reset. You do this by very carefully taking both battery poles off the battery entirely. Then touching the negative to the positive WHILE NEITHER IS TOUCHING THE BATTERY (this is very important otherwise you could get shocked). This will clear computer and reset it. Then reconnect the positive first. then the negative. this will sometimes work. This is only if the light for the heated seats is not coming on. If the light is coming on you probably need a new heater core.

Posted on Mar 04, 2010

SOURCE: 2003 Lincoln Navigator Heated Seat Problem

Can only Diagnose with a scanner and a trouble chart. It's all electronic

Posted on May 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Buick Lucerne CXL: Cooled seats not working. LIghts come on, temperature adjusters work but the motors under the seats do not come on.


Air Circulation
When the heated/cool seat switch is pressed to initiate operation of the climate control seat (CCS) system, cabin air is drawn through the heated/cool ventilation module air filter, then directed through passages in the foam of the seat cushion and seat back to the seat's occupant. In order for the CCS system to operate to its optimum performance, it is crucial to have unrestricted air flow through the system. A dirty or restricted air filter, the blockage of an exhaust air duct, a misaligned heated/cool ventilation module, or incorrect foam installation of the seat cushion or seat back will all have negative effects on CCS operation.
Heated/Cool Ventilation Module
Each heated/cool seat has 2 ventilation modules, one located under the seat cushion and one located in the seat back. These modules are controlled by the climate control seat module (CCSM). Each ventilation module contains a thermo-electric device (TED), a temperature sensor, and a blower motor. The TED and temperature sensor are mounted downstream of the blower motor. Each TED consists of a circuit of positive and negative connections sandwiched between 2 ceramic plates. Each ceramic plate is equipped with copper fins for heat exchange. The air flowing past these fins is either directed as conditioned air into the seat cushion and seat back, or directed into the cabin as waste air.
A TED is essentially a solid state heat pump that is used to heat or cool the air supply to the seat cushion and seat back. When voltage is applied to a TED, one side releases energy as heat, while the opposite side absorbs energy and gets cold. When the polarity of the current flow to the TEDs is switched, the hot and cool sides of the TED reverse.
During the following climate control seat system description and operation, the TEDs, blower motors, and temperature sensors will be referenced independently even though they are all packaged together as a module.
Climate Control Seat (CCS) System
The CCS system consists of two heated/cool ventilation modules and one climate control seat module (CCSM) that controls both the driver and passenger heated/cool seats systems. The CCSM is mounted below the front passenger seat cushion. It receives power from both, battery positive voltage and ignition 3 voltage.
Once a CCS system is activated, cabin air is drawn through the seat blower motors and directed across the fins of each of the thermo-electric device (TED) located under the seat cushion and in the seat back. The air is either heated or cooled as it passes over the TEDs. This conditioned air is then directed through channels in the foam of the seat pad and through small holes in the seat cover to the occupant. Once the system is activated, the CCSM uses a set of algorithms to control the temperature of the selected heating or cooling modes.
Your best bet is to take your vehicle to a qualified repair shop an have it diagnosed .
DTC B19A4: Driver Seat Back Blower Speed Circuit High

DTC B19A8: Driver Seat Back Blower Speed Circuit Short to Ground

DTC B103D: Driver Blower Power Circuit

DTC B272E: Driver Seat Back Blower Circuit Open
DTC B19A3: Driver Seat Cushion Blower Speed Circuit High

DTC B19A7: Driver Seat Cushion Blower Speed Circuit Short to Ground

DTC B2729: Driver Seat Cushion Over Temperature
DTC B19A2: Passenger Seat Back Blower Speed Circuit High

DTC B19A6: Passenger Seat Back Blower Speed Circuit Short to Ground

DTC B111D: Passenger Blower Power Circuit

DTC B272F: Passenger Seat Back Blower Circuit Open
DTC B19A1: Passenger Seat Cushion Blower Speed Circuit High

DTC B19A5: Passenger Seat Cushion Blower Speed Circuit Short to Ground

DTC B272A: Passenger Seat Cushion Over Temperature
Driver and Passenger Heated/Cool Seats Inoperative
  1. Ignition OFF, disconnect the C1 harness connector at the CCSM.
  2. Test for less than 5 ohms between the ground circuit terminal M and ground.
  3. ?‡'
    If greater than the specified range, test the ground circuit for an open/high resistance.

  4. Verify that a test lamp illuminates between the B+ circuit terminal E and ground.
  5. ?‡'
    If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.

  6. Disconnect the C2 harness connector at the CCSM.
  7. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal 1 and ground.
  8. ?‡'
    If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance.

  9. If all circuits test normal, replace the CCSM.


Sorry

Jul 10, 2016 | 2007 Buick Lucerne CXS Sedan

1 Answer

2010 Lincoln MKS Heated Seat on driver's side stopped working (Light in button turns off on its' own)


The most common cause of this problem is that the drivers seat heater grid is open or burned out. That is based on 25 years as a Ford dealer technician.

Feb 27, 2017 | Lincoln Cars & Trucks

1 Answer

2008 lincoln navigator heated/cooled seats turn off in seconds both sides


Heated seats have a circuit breaker instead of a fuse. Both sides work off the same breaker. This is what I would replace first. It's on the cabin fuse panel. Look in your owners manual to find it.

Nov 30, 2014 | 2008 Lincoln Navigator

1 Answer

Heated / cooling seats...?


perhaps the connector is unplugged under the seat.

Apr 30, 2013 | 2006 Lincoln Zephyr

2 Answers

Heated seats buick lucerne 2007 wont heat or cool


The module for the heated/cooled seats is underneath the front passenger seat. Buick had a problem with poor contact on the connector plug resulting in a melted connector. The module is mounted to the bottom of the seat and although it's tight, you can remove the two nuts holding it in place and pull it out to the front of the seat to access the connectors (there are 3). I had a burned connector on the biggest connector. I found a replacement connector (12-cavity) and terminals on eBay and just finished wiring the new connector. Results are disappointing because the driver's seat still doesn't work and the passenger's seat doesn't work all the time. Guess it's time to invest in a new module.

Jan 30, 2013 | 2007 Buick Lucerne

1 Answer

2009 Lincoln MKS heated seats do not work


there is a heat /cool control module under the drivers seat.

Jan 25, 2013 | 2009 Lincoln MKS

2 Answers

Driver's side heated seats keeps shuting off


try swopping the feed wires around and run the passenger one over to teh drivers side

Oct 23, 2009 | 2004 Saturn VUE

1 Answer

Passenger heated/cool seats not working


The seat switch or the heated seat relay is bad.Always check your fuses first.

Aug 01, 2009 | 2003 Ford Expedition

2 Answers

Heated and cooled seats quit working. won't work on either driver's or passanger's seats. checked the fuses and relays and they are all ok. what's wrong?


Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.

Apr 23, 2009 | 2006 Lincoln Zephyr

Not finding what you are looking for?
2005 Lincoln Aviator Logo

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

fordexpert

Level 3 Expert

5501 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...