2007 chrysler aspen won't shift into gear from park

SOURCE: alternator ,battery or fuse

but a new battery then if that doesn't work its your alternator

Mike Schmidt

• 227 Answers
• Posted on Jan 16, 2009

SOURCE: 2000 crown victoria -brake lites failed

You have a bad switch at the brake pedal. Or a loose wire. Try light pulling on the wires on the switch at the brake pedal under the dash. They should be tight and secure. If tight and secure the switch could be bad.

ray calhoun

• 166 Answers
• Posted on Apr 07, 2009

SOURCE: My Truck wont shift out of park and my brake lights arent working

there a little switch on the shifter to stop it from going into gear with out the brake on .eather theres no power or switch is bad. it under the dash at the shifter .good luck

SOURCE: No Brake Lights, unable to switch from park to drive

It is not the multifunction switch. The power feed goes thru the brake switch before the multi function. You have no power the the brake switch because your shift interlock is not allowing you to shift it. I'll look up the wiring diagram and repost with a solution.

SOURCE: Transmission shifter is stuck in 'P' on my 2002 F150 Fx4 Supercrew, why?

You need to check the connection on the front of the master cylinder. This is the brake disengage for the cruise control. If it is wet this is the problem of the short. You need to replace the unit. This was a recall by ford. Now check the #15 fuse (5a) this controls the brake interlock switch. When you put the fuse in you will hear a click. This means you can now take the truck out of park. The lights will come on and the windows will work. If the windows don't work check the other fuses. By pulling them and replacing them made the windows work for me.