Question about 2007 Nissan Titan LE

Open Question

ABS lights and slip light stays on my nissan titan 2007.I have a code that comes up p1668 is that the code for the sensor

I dont have the VDC But my slip lights and ABS lights stay on my nissan titan 2007 cant put it in 4 wheel drive.what fault code would it be to cause this

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 454 Answers

SOURCE: My brake, slip and VDC indicators stay on.

Check brake fluid level, add fluid from sealed container if needed.

Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.

Posted on May 13, 2010

SOURCE: 2005 nissan titan slip light stays on

You checked to see what codes you may have?

Always start there,no matter what the issue with
any vehicle

Posted on May 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a Nissan Maxima 2007 last night my car stalled then the VDC off then slip light came on why did this happen and can I still safely drive my car.


NO, its NOT SAFE TO DRIVE. Your car may loose power in the middle of the intersection and then what? VDC and Slip light may be related to ABS system, please have it check.

Apr 23, 2017 | Nissan Cars & Trucks

1 Answer

2007 xterra had trans rebuilt VDC light on constant and slip will come on and the go off no codes sowing or ABS?


I know this VDC is commonly due to a steering angle sensor.
You need to use an ABS scan tool and check for the following codes.
C1143 (steering angle sensor circuit)
C1144 (steering angle sensor signal)
C1156 (steering angle sensor com cir)
C1163 (steering angle sensor safe)

Dec 28, 2016 | Cars & Trucks

1 Answer

What does Brake light,VDC light and slip lights on . This happened when brake pedal pulsates,but I do have brake pedal.


See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.

2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.

3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.

4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.

May 21, 2014 | 2004 Nissan Titan

1 Answer

Where is the front vss abs in a 2006 nissan titan 4wd


perhaps you have a shorting wire. check carefully, my ABS always used to come on for no reason during driving and it turned out there was 2 terminals bent together and touching.

Nov 20, 2013 | Nissan Cars & Trucks

1 Answer

My brake, slip and VDC indicators stay on.


Check brake fluid level, add fluid from sealed container if needed.

Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.

May 06, 2010 | 2004 Nissan Titan

1 Answer

The brake light, VDC light and Slip light remain lit on my 2004 Nissian Titan truck. What would cause this?


I have a 04 Titan with 132k on it. I have had this issue off and on for the past 4 years however lately it's happening way to often. I took it to ABC Nissan in Phx. A service writer told me it was the Booster Pump $900.00 fix. Nissan says to reset sensor but, this never works. I'm trying to get a few more opinions about this before spending that much money on what they think is wrong.

Oct 27, 2009 | 2004 Nissan Titan

3 Answers

VDC, Slip, & ABS Lights


I had the entire brake system checked (No Problems). This is an issue with Nissan.

Oct 31, 2008 | 2004 Nissan Titan

Not finding what you are looking for?
2007 Nissan Titan LE Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...