Question about 2005 Nissan Murano

1 Answer

How do i replace O ring on oil cooler - 2005 Nissan Murano

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Nissan Expert
  • 110 Answers

Take off the oil filter, use 7/8 inch or 22 mm socket to loosen stud bolt, rotate oil cooler down to pull off old seal ring, then put new ring in groove and feel it seated all around it flat in groove, torque bolt 49 Nm

Posted on Jan 03, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine diagram


That is the oil cooler. Remove the oil filter. That exposes a large 'nut'. Remove the nut (and the 2 lines going in/out) and replace the oil gasket/O ring. If original oil cooler is dent or damaged, replace cooler as well. Could also just come from the lines going in and out of the cooler (put new hose clamps on).

Jan 05, 2014 | 1997 Audi A4

3 Answers

I have oil leaking from gasket or O-ring on oil cooler. Mazda says you have to buy new oil cooler = $400+. Is there a gasket or O-ring replacement available. 2007 Mazda 5 Touring.


on line, auto zone has a o ring for oil cooler at a reasonable cost. if the cooler is contaminated or corroded it needs replaced. if you need one, go online for the best deal. for it cools the oil for the engine. let them know at auto zone, and they should be able to advise you. car dealerships are a big ripoff. a fan blows air on engine oil cooler for disipation off heat. this is important to regulate the tempurature of the oil. have a very good day !!

Jan 20, 2011 | 2006 Mazda 5

1 Answer

Win i start the car and look under the hood, there is oil coming out of a box that is, on the side of the block. But above the oil filter ?? . How do i fix that, is it a gasket or what ??


That is the engine oil cooler. There is a 'O' ring between it and the oil filter mount. They harden and crack.

Ask your dealer for the large Oil Cooler 'O' Ring.

Remove oil filter. Remove exposed pipe nut holding oil cooler to housing. If nessacary, drain coolant so you can disconnect coolant hoses from cooler or catch coolant as hoses disconnected. Swing oil cooler away and remove old 'O' ring.

Place new 'O' ring with grease on oil cooler it to hold it in place and reassemble. Tighten oil filter pipe nut to around 18 ft lbs .

Refit oil filter. Refit coolant hoses and top of oil and coolant.
Run engine to check for leaks and allow to cool. Top of coolant to COLD level if required.

You will need hose clamp pliers and wrench for oil cooler pipe nut. Pliers can be obtained from most parts stores.

Jan 12, 2011 | 1996 Volkswagen Jetta

1 Answer

97 vw golf 1.8 there is a squar box where oil filter fastens to. oil is leaking from top of this box. what is this box and how i fix the leak?


The box is the oil cooler. The oil is most likely leaking from the oil cooler seal. The oil cooler is the square aluminum piece that the oil filter screws onto. To replace the seal, remove the filter, remove both coolant hoses that attach to the cooler, remove the nut that secures the cooler to the block and slide the cooler off the tube. Replace the rubber o-ring seal which is available at the VW dealer. It's inexpensive. Replace everything in reverse order. Good luck

Jan 05, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Oil leaks pour from my Oil cooler right above oil filter when I start driving


The oil is most likely leaking from the oil cooler seal. The oil cooler is the square aluminum piece that the oil filter screws onto. To replace the seal, remove the filter, remove both coolant hoses that attach to the cooler, remove the nut that secures the cooler to the block and slide the cooler off the tube. Replace the rubber o-ring seal which is available at the VW dealer. It's inexpensive. Replace everything in reverse order. Good luck

Jan 03, 2011 | 1997 Volkswagen Jetta

1 Answer

Oil is leaking between the block and the oil filter housing, how do i take of this problem


I'm not sure what year or model your car is, but if it looks like the picture below then this is what you do.
The o-ring behind the engine cooler is leaking and need to be replace.
1.remove oil filter. You might want to use a new filter.
2.there's 24mm nut(i color it red in the picture). Use a socket to remove nut. Note:the nut and tube that the oil filter screw onto is one piece.
3.pull the cooler away from the block and there should be a o-ring behind the cooler, replace o-ring and reinstall.
k42282_26.jpg

Dec 21, 2010 | Honda Odyssey Cars & Trucks

2 Answers

Engin oil cooler


oil cooler is in the radiater

Jun 19, 2009 | 1992 Daihatsu Charade

1 Answer

Honda accord 1992 I have a oil leak around the oil filter is it


is it an ex?
is it a bad leak?
it could be 2 things
1) oil pressure sending unit above the filter
2) "o" ring between the oil cooler and block on ex models only. the oil cooler is between the filter and block with 2 coolant hoses attached to it. also might be the oil filter. i replace alot of sending units and oil cooler o rings.

Dec 19, 2008 | 1992 Honda Accord

1 Answer

2003 Nissan Pathfinder


Oil cooler o-ring.
http://www.nissanpathfinders.net/forum/topic/25463-engine-oil-cooler-leaking-oil/
Not all coolers look like radiators. I wouldn't think it should cost that much. Try somewhere else.

May 01, 2017 | 2003 Nissan Pathfinder

2 Answers

Oil leak


common oil leak on those vehicles is the "quick connects" where the oil lines go into the oil cooler (what i believe you are calling the "doble") replace the o-rings on the quick connects for the lines

Oct 05, 2008 | 1999 GMC Suburban

Not finding what you are looking for?
2005 Nissan Murano Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...