Question about 2000 Nissan Maxima
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
SOURCE: 95 maxima O2 sensor
You unplug one end and unscrew the other end. Autozone/Checker will loan you a special tool to remove it, but I always use a standard box end wrench.
I have had a 94/00/02 Maxima in our household. I have changed 3 oxygen sensors and 1 time it did not fix the problem. Sometimes they unscrew easily, sometimes they don't (try it cold first - working on hot cars is not fun).
The toughest part of the last change was running the cable down between the engine block and getting holders to clip into place (I suggest you get a Nissan sensor and not the universal if you want it done right - check online because the local dealer will charge 20% more unless you are good haggler - or have an easy sales guy).
The sensors are usually labeled blue/white/black based on the cable color.
Check maxima.org for lots of maxima hints.
Posted on Jul 16, 2009
You need to remove all of the air intake and other things behind the battery. The start motor is held in with two bolts. You might need a breaker bar to break loose the one bold as I did. Once you remove all of the air intake equipment. This will help you gain access to the starter motor. You might not need to remove all the air intake equipment I know it made it alot easier for me to remove the starter and I took it to the auto store and had it tested.
Posted on Apr 07, 2009
There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver side wheel off and see the sensor on the top of the case of the transmission. A 10mm bolt is holding it in. Easy fix
Posted on Jun 17, 2010
Tips for a great answer:
Mar 16, 2016 | 2000 Nissan Maxima
Apr 14, 2011 | 2000 Nissan Maxima
Feb 11, 2011 | 2000 Nissan Maxima
Oct 12, 2010 | 2000 Nissan Maxima
Dec 02, 2009 | 2001 Nissan Maxima
Oct 27, 2009 | 2000 Nissan Maxima
Mar 23, 2009 | 2000 Nissan Maxima
395 people viewed this question
Usually answered in minutes!