Question about Saturn Cars & Trucks
Uninstall wiper blades
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The problem with this wiper blade set up is the slides get jammed up w/ crude. You should lubricate the slides and they should slide off. Then carfully lift the arm and remove the blade. Warning you should never leave the arm in the upright position. Windshields get cracked this way. Also note the pivit points the blades attach too. These will normally sieze up and cause clearing issues even with new blades. Lubricate these pivit points and use a pair of channel locks to move it back and forth until it will go 360 degrees with your fingers. Install is in reverse order of removal.
Posted on May 28, 2009
The speaker should be removed from the trunk. You shouldn't have to remove it from the back seat. There is probably just a couple of clips or screws that hold them in
Posted on Jul 08, 2009
SOURCE: Remove wiper blade
Do you mean the wiper blade or the wiper arm?
The wiper blade should have a small tab or lever on the underside of the hinge where it attaches to the arm. Use a small screwdriver or a pick (etc..) to gently pry the lever upwards to pull the locking tab out of its corresponding hole on the wiper arm. Once the tab is up, firmly grasp the wiper blade and pull towards the base of the wiper arm. Sometimes they stick a little, just be careful not to bend the wiper arm.
If you are looking to remove the wiper arm, remove the plastic cap at the base of the wiper arm to gain access to the nut below. Using either a 13mm (1/2 inch) or 15mm socket (depending on the model) remove the nut by turning counter-clockwise. Once the nut is off, place your hand in the middle portion of the wiper arm and firmly push downward, being careful not to bend the arm. What you are trying to do is rock the arm off of the wiper motor stud. Be sure to mark where the wiper blade rests on the windshield before removing it, so you can reassemble it in the same spot when you put it back together. Use a grease pencil or something else that you can clean off later.
Hope this helps!
Posted on Jul 25, 2009
Tips for a great answer:
Feb 12, 2015 | 2009 Saturn Outlook XR
Aug 20, 2014 | Saturn L-Series Cars & Trucks
Dec 15, 2013 | Cars & Trucks
Jun 29, 2012 | 2001 Saturn L-Series
Dec 20, 2010 | 2002 Saturn L-Series
Dec 03, 2010 | 2008 Saturn VUE
Aug 30, 2010 | 2001 Saturn L-Series
Aug 21, 2010 | Saturn SL1 Cars & Trucks
Feb 22, 2010 | 2008 Saturn VUE
Nov 14, 2008 | 1996 Saturn SL
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: