Question about 2006 Honda CR-V

Open Question

When I back up and turn the wheel in my 2006 Honda CRV it makes a thumping noise.

It sounds and feels as if I'm driving on a bumpy road. What is this?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 23 Answers

SOURCE: knocking in rear struts

bad ball joints

Posted on Apr 24, 2009

  • 2 Answers

SOURCE: HONDA CRV DRONING NOISE WHEN ON FULL LOCK!

change the rear end fluid.

Posted on Apr 30, 2009

  • 24 Answers

SOURCE: Loud road noise

unless you are off road or it snows alot where you live I would recommend MICHILIN or CONTINENTAL touring style tire

Posted on Aug 19, 2009

  • 3 Answers

SOURCE: vibration on Honda CR-V 2006 at speed 40-50 mph

This is your one of your axels.. they are damaged inside.. Get them removed asap it can cause major damage if it brakes loose..each axle costs about $90-100

Posted on Feb 04, 2010

johnjohn2
  • 5763 Answers

SOURCE: replacing cruise control bulb on honda crv 2006

JUST POP SWITCH OUT AND BULB GOES INTO SWITCH USE SMALL SCREW DRIVER TO REMOVE YOU WILL HAVE TO TWIST IT COUNTERCLOCKWISE TO REMOVE, TWIST CLOCKWISE TO INSTALL.

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 grand am gt sedan right front clack, and popping when turning or slowing down


If you hear a clacking sound esp. while turning. Sound like your CV joints (constant velocity) or Front Wheel Drive axle.

Apr 13, 2013 | 2002 Pontiac Grand Am

1 Answer

What could cause a thumping noise from the front end when turning at low speed?


sounds like wheel bearings-1st
but hopefully your front disc need turning, or replaced.
check wheel bearings by jacking up the front end "CAREFULLY" WITH
JACK STANDS & wiggle tires,if you get more than a 1/4'' slack on 1 or the other, than it's shot. Best to replace both sides. "GOOD LUCK'' &
BE CAREFULL.

Aug 22, 2012 | 2009 Hyundai Elantra

2 Answers

2006 Honda CRV makes screeching sound while turning corners


built into the brake pads is a small bit of metal that when the pads get to low to be safe , runs on the rotor and produces the squeal applying the brakes stops the vibration so the noise drops off

Jun 29, 2017 | 2006 Honda CR-V

1 Answer

Front suspension noise-dull rattle-thumping sound,bumpy roads


look at the front lower engine mount. I had similar noise which has been driving me nuts, thought may be thesway bar links, put it on friends hoist and saw that the front engine mount (mounted to bottom of lower radiator support) was cracked and the rubber bushing inside very worn with pieces missing. odd thing is that reving, or putting into gear never caused it to make a noise, just certain bumps. I ordered part from Autozone,hopefully it gets here before the holiday week end is over.
Good luck

May 15, 2010 | 2005 Dodge Caravan

1 Answer

When driving my 2004 honda accord coupe, 4cyl auto-it feels like in driving on a bumpy road always, just had new tires put on and rebalanced the tires twice so far. what can be doing this?


Take the vehicle in for a wheel alignment . The alignment
machine will tell you exactly what is wrong and how to fix it. Sounds like struts.

May 13, 2010 | 1992 Honda Accord

1 Answer

2006 saturn ion right side thumping on bumpy roads


either a bad sway bar end link noisy,or the lower control arm busgin is collapsed,if it slight noise its the sway bar link if its a loud metal to metal slap is the lower control arm bushing,,,check to see if its laying against the sub frame,it inline with the back of the front wheel and there is one 21mm bolt that goes thru it from the bottom,thats the are its at , common issue

Oct 15, 2009 | 2006 Saturn Vue

2 Answers

2006 Honda Pilot - Road Noise - not tires.


the tires make steady noise , check the wheel bearing as noises get high and low at the same speed , and i also would check for diff if it's 4wd.

Jul 16, 2009 | 2006 Honda Pilot

1 Answer

2006 Honda CRV with faulty 4 wheel drive unit


call the service hotline number on you owners manual for honda usa and see what they recomend. you might try to locate the fuse for your electronic all wheel drive and remove it and see if it is smoother to drive. any shaking shows signs of a unbalanced drivetrain which is not good for the conponents.

Jun 08, 2009 | 2006 Honda CR-V

Not finding what you are looking for?
2006 Honda CR-V Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...