Question about 2005 Kia Optima
Idid not take it a part .It has a new head .ITjust hit and crank with out starting on starting fuided Did i not do something right IT like i am not getting fuel
Sound like timing off.if valve timing off engine not going to fire.during intake stroke if intake valve timing off engine cant draw air and fuel in for combustion wont fire.
Posted on Jan 14, 2013
I am looking at a customers car and there are pieces of timing belt falling off wheni pull the timing belt cover off this a interference engine she stated that she heard a clank clank show and it would not start anymore no fire do we have a problem bigger then the timing belt being no good.
Posted on Jul 01, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 kia optima
Try the ignition switch,
For the Crank sensor there is a small metal disc that mounts behind the sensor if that is cracked or dammaged or installed backwards you will get same results as if it wasn't Make sure the timing marks line up on your timing belt. www.kiatechinfo.com
Posted on Jan 19, 2009
SOURCE: timing belt broke
look at the motor, the side with all the belts, all that stuff has to come off and more not to mention the cam gears have to be set just right. it's a headace for an experinced person.
Posted on Mar 15, 2009
did you use aftermarket crank sensor? if so that might be your problem. dealer has several different ones, by providing vin number, but there is only one after market for all optimas 01-05. try to connect thick pink wire and thick orange wire together on the ignition failure sensor. you might have the same problem as me. good luck.
Posted on Jan 15, 2010
p0560 is system voltage problem. open or short between the battery positive and the ecm.CHECK ALL FUSES. dosnt matter what they are labeled under dash and under hood replace any that are bad and retry to start. no start then check voltage to ecm grounds to. i dont have a wireing diagram to give you but for a small fee or free the dealer can make you a copy.make sure all the wires that go to battery terminals are not corroded and are making good contact [verified with volt meter]. if after all checks ok then replace ecm. as a side note i havent had to change one ever.
Posted on Apr 11, 2010
Testimonial: "Thank you for the help. We will continue to check all fuses and wires."
Tips for a great answer:
Feb 17, 2015 | 2004 Kia Optima
Jan 25, 2014 | Cars & Trucks
Jan 16, 2013 | 2005 Kia Optima
Apr 18, 2011 | Kia Optima Cars & Trucks
Feb 09, 2011 | 2005 Kia Optima
Jan 11, 2011 | 2003 Kia Optima
Jul 23, 2010 | 2003 Kia Optima
236 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: