Question about 2007 Mercury Marauder

2 Answers

Headlights won't stay on!

Headlights turn off and on while driving. dealer said it was the blinker switch so i replaced it but its still doing it!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Mercury Expert
  • 93 Answers

If you have a 1999-2011 Mercury Marquis, Mercury Marauder, or Crown Victoria, and your headlights and or tail lights don't work, Ford just finally extended the warranty on your LCM (Lighting Control Module) for free - both parts and labor and will install a new one for free! Ford has extended the warranty to 15 years/250,000 miles. It must be done at a Ford Dealer and the fix is free. Call your local ford Dealer and tell them you need to make an appointment because your headlights don't work and Ford has extended your warranty on the LCM. Tell them it is the Customer Satisfaction Program 14N01. Have your Vin number ready as they will ask for it. You don't have to be the original owner. If they act like they don't know what you are talking about ask to talk to the manager or tell them to call Ford Motor Company and ask them, or you can call Ford yourself. We had ours done at a Ford dealer in August of 2014 in Scottsdale, AZ. It is a 15 year warranty and if you have a 1999, the deadline might have passed, but call them and ask them to see if it has. Maybe it hasn't."

Posted on Feb 12, 2016

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

This is not due to the multifunction switch (blinker switch) but a common problem with the light control module. This module is located under the driver side dash next to the OBD Reader plug. The problem inside the light control module is a $4 resistor that overheats and sometimes causes the headlights to fail after only a short period of running time. This can be replaced if you're good at soldering, or you can replace the whole module anywhere from $75-200 (junkyard to dealer)

Posted on Apr 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2007 ford f150 blinkers and 4 ways work fine untill headlights turned on then blinkers stay light but not blinking


Could be the turn singal relay not getting the correct power when lights engaged. Take out bulb from headlight and then turn on headlights. Now no power to the headlights. Try to turn on blinkers now. If they blink replace signal relay, if they still are solid it may be your flasher. Just a guess without looking. Thanks.

Sep 04, 2014 | Ford F-150 Cars & Trucks

1 Answer

2002 Grand Marquis headlights won't turn off with switch, won't go out until vehicle is turned off


Might these be "driving lights"?
Cars with "driving lights" have lights that are supposed to stay on all the time the engine is running.
These lights not only look like headlights, in fact some cars even have the headlights themselves come on when the engine is running. Look as some more (several) 2002 Grand Marquis's and see if they are the same.
Be blessed.

Feb 05, 2013 | Mercury Grand Marquis Cars & Trucks

1 Answer

Headlights won't come on


Multi function control switch has to be replaced.

Nov 01, 2012 | Chrysler Cars & Trucks

2 Answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...


mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

May 19, 2011 | 2007 Jeep Grand Cherokee Overland

2 Answers

When I turn on my headlights, my radio goes dark and plays static. The domelight and floor lights go on, my dashboard lights don't work, and my tail lights don't work. If the headlights are off, the radio...


It sure sounds like you have a case of "sneak circuits"
These are usually caused by a bad ground somewhere and something is "grounding" through the light bulbs.
Have you changed any wiring or installed a stereo or some other accessory?
You might use a jumper wire and ground the dash and other areas to the negative battery post as a way to find the culprit.

Apr 30, 2010 | 1991 Chevrolet S-10 Blazer

2 Answers

Left blinker stays on when light are on then when


If it has a combination switch,headlights,wipers,turn signal all on one lever,then it is the problem.Unless the bulb in that signal light is bad,the filiment in the bulb can melt down and cause a back feed.Try changing that one bulb first.

Apr 04, 2010 | 2006 Kia Sportage

1 Answer

Rapid blinkers and hazard switch


first check all of the bulbs are good. on some cars if a bulb is burned out the blinker will flash faster than normal.

Nov 02, 2009 | Audi A6 Cars & Trucks

3 Answers

98 Buick Lesabre Blinker Problem


If ALL Wiring in Trunk is Good Then Its The SWITCH = Multifunction Switch<<

Feb 11, 2009 | 1997 Buick LeSabre

1 Answer

Drivers side reverse light on while i drive.


Your car has rear fog lights. The rear light that you see come on with your headlights is your rear fog light. The light in your dash is the rear fog light indicator. To turn off your rear fog lghts push your headlight switch in half way. To turn off your front fog lights push in all of the way.

Jan 13, 2009 | 1999 BMW 328 Series

1 Answer

2002 Jeep Liberty headlights blink


I have the same problem. I had it when I turned on my Blinker and turned. When the switch in the steering wheel turn the blinker off it made my head lights blink sometimes. It has to do with the switch that controls the blinker and the head lights. It does not happen all the time.

Aug 18, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
2007 Mercury Marauder Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Fordexpert

Level 3 Expert

5367 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...