Question about 2005 Toyota Tacoma

Open Question

Removing ignition fuse in a 2005 Tacoma

Blew the 130 amp ignition fuse during a battery change and not able to get the fuse out to replace it?

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 22 Answers

SOURCE: Engine won't start, headlights go on, radio off,

you've learned a valuable lesson; never let your dad touch your car!

Posted on Feb 13, 2010

  • 242 Answers

SOURCE: hi i connected the jump leads

Get loose the fuse box, remove the lower cover, remove the 2 8mm bolts that hold the fuse,and replace it, do not let the car piggy backed for a long period of time is a little dangerous.

Posted on Dec 28, 2010

geterrollin
  • 277 Answers

SOURCE: A friend tried to jump

I would start within the ignition itself in the steering column also try disconnecting the ignition coils wiring.The short could be ANYWHERE.Toyota generally runs the ignition, battery, ECM and ignition coil off of the ignition fuse. The ECM controls things such as oxygen sensors, brakelight signal and starter signal. Start at the battery and slowly inspect back, keep me informed of progress but look carefully at the ignition on the column and wiring leading to it

Posted on Jan 19, 2011

japkid
  • 107 Answers

SOURCE: i have no ignition spark,

yes there is a fuse that controls the ignition aswell you could have blown all those underhood relay fuses, an ive seen people fry computers doing this aswell, check/replace bad fuses an if its still a no go, try an do a diagnostics check on it

Posted on Feb 12, 2011

Testimonial: "thank you for your help . i will try your sugesstions"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TOYOTA TACOMA 2004 THERE IS NOT COMMUNICATION BETWEEN THE SCANNER AND COMPUTER


are you sure you tested all fuses there should be a 5 amp fuse for the ecm or pcm as well all the fuses inside car as well outside car in engine compartment worst of all take a jumper cable and jump from negative side of battery to the engine as well the relays are they all working you could have a bad relay from ignition or the ignition key switch itself could be the problem but when you say it wont start does it crank over or nothing at all that means no power from battery is the battery good

May 05, 2014 | 2005 Toyota Tacoma

1 Answer

2005 Chrysler Town and Country Touring died when put in reverse. Battery is strong. Will not Start. Ignition Fuse blew. Any Ideas?


It looks like you have a short somewhere. You would need to inspect all the wiring related to that in order to pin point the problem. Also check if there is another system working from that same fuse. ie. Power Outlets. Sometimes if they go bad it will blow the fuses shutting down everything else.
I hope this helps!

Mar 27, 2013 | 2005 Chrysler Town & Country

1 Answer

2005 Saturn Vue Repetitive Ignition Fuse Failure


I think there is a short in the system, possibly happened while replacing the main brain.

Jun 19, 2012 | 2005 Saturn VUE

1 Answer

I blew the fuse for the auxillery power (looks like the "cigerette lighter" recepticle). I haven't been able to figure out what it is called on the fuse panel. Passenger side, side of dash board.


THE NAME MAY BE HARD TO RECOGNIZE. GET A GOOD FUSE TESTER, & TEST EVERY FUSE.THERE IS A FUSE PANEL INSIDE THE VEHICLE & ALSO UNDER THE HOOD. ALL OF THE FUSES CAN BE TESTED WITHOUT REMOVING THEM FROM THE FUSE BOX. LOOK CLOSELY & YOU CAN SEE TEST POINTS FACING OUT ON EACH FUSE. POWER ON ONE SIDE OF THE FUSE ONLY, MEANS THE FUSE IS BAD. POWER ON BOTH SIDES , THE FUSE IS O.K.
IGNITION SWITCH SHOULD BE ON DURING THE TESTING.

Jan 01, 2011 | Pontiac Montana Cars & Trucks

1 Answer

The reostat that controls dome light and dash lighting-meltdown


As the voltage from the battery drops, the starter will draw more current, which may have caused the fuse fry - more likely, the connection between the fuse and the socket was worn, causing an arc in the socket, effectively welding the fuse to the socket. You can try using a piece of wire to jump across the two silver tabs on the top of the fuse, and seeing if you can start the car, but eventually, that fuse has to come out.

Mar 12, 2009 | 2005 Toyota Corolla

1 Answer

Power windows in MPV keeps blowing fuses


you might have a short to ground problem. the circuit is complete from the battery to ground. Check the wire from the fuse to the load, and chances are there's a spot in it where the wire is touching ground.

Feb 23, 2009 | 2005 Mazda MPV

3 Answers

2005 toyota tacoma check engine light


pull the E.F.I. fuse located under the hood on the drivers side, if there is more than 1 efi fuse pull them both along with the E.T.C.S. fuse (if there is one) for 1 minute or so. That should do it

Dec 23, 2008 | 2005 Toyota Tacoma

1 Answer

Passat Indicators Blowing Fuses 2005 model


It sure sounds like a short in the left signal circuit. I can't say where the wires are routed but you may have one with failed insulation or pinched under some hardware.
You could avoid repeated fuse replacement if you buy a cheap digital multimeter from Radio Shack (if you are in the US) or alternately, from an auto parts store. One adequate for this would be under $20 US. Some have a continuity checker that sounds a 'chime' that stops when the resistance level rises a bit. Since the meter could be damaged if the short clears, it would be smart to disconnect the negative side (ground) of the battery. Putting the probes across the fuse contact will simulate the fuse for this checking but it will not let your signals function. I would punch the probes into the fuse holder, put on the left turn signal and start removing bulbs and checking the routing of the wiring. When the chime stops, you have found the culprit. 

Sep 19, 2008 | 1999 Volkswagen Passat

1 Answer

1997 toyota tacoma ignition clicking


what engine size and transmission, automatic or stick shift do you have in this truck?

Aug 08, 2008 | 1997 Toyota Tacoma

Not finding what you are looking for?
2005 Toyota Tacoma Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...