Question about Cars & Trucks

1 Answer

I need to wire my EQ myin my car - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

According to this video, it appears as if it is working but the audio we are hearing is distorted pretty much. dont know exactly whats in line where but it would seem to me that it depends on working voltage like sitting still with the car not running, or with the car running the voltage(and available power) is greater, or what type of speakers you are shoving on..usually an equalizer is in line before the amp and acts as a separate base volume and treble control to customize the ultimate sound from the system, provided the speakers can handle the noise comming from the equipment..usually the setup follows the same with a home stereo setup, just in a more confined space is all, you need to loom the wires after marking them so this spiderwebyou now have will look good too but keep the power and speaker wires separate, dont loom together..good luck

Posted on Jan 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WIRING FOR 16164325 DELCO RADIO


That is not a radio. That is a control head. The 7 wires carry data to the radio brain which on this trucks is a silver box located directly above the gas pedal. These trucks also had an optional cassette player/ cassette and eq unit that was mounted in the center of the dash that also connected to the radio brain as well.

Jul 17, 2016 | 1993 GMC Sierra K1500

1 Answer

Need to connect a jet sound graphic equalizer JS-234 to a car stereo. The wires had folded stickers and some a gone. The colors of wires are red,black,gray,green.Only have 2 front speakers .


If it's only 4 wires, Red & black are typically power. red +12volts & black is ground. Gray would be one channel say right side and green would be left (example) you would ground the negative speaker lead on both sides. That is probably an old unit and make sure your car is negative ground. Some Ford & Nissan are positive grounded for some circuits which you may need to reverse the power connections. Make sure there is an in line fuse on the power wire just in case.

Feb 14, 2016 | Cars & Trucks

1 Answer

2000 Chrysler Sebring Conv. Side mirrors and a/c not working. What would cause this


Side mirrors may be a wiring issue possibly near the driver door area where it would come from the door into the A pillar to under the dash,sometimes from age and door operation the wires break inside that harness.AC issue would need to be checked by a certified AC tech to check for leaks and operation,could also be a electrical issue or low on freon from a leak.

May 04, 2014 | 2000 Chrysler-03 Sebring 2 Door 00-01...

1 Answer

I connect the acc wire to 12 volt and stereo stays on all the time


The accessory wire is suppose to be hooked up to your ignition wire and not a constant 12 volt power source. Hooking it up to your ignition wire will only give the stereo power when your key is in the accessory position or in the running position. The constant power source that you mostly connected to is meant for the memory wire on your stereo which will allows it to save your setting when you turn the vehicle off and your stereo kicks off. Otherwise you will end up setting the clock and adjusting your EQ every time you turn it on.

Feb 22, 2014 | 2004 Pontiac Sunfire

2 Answers

Myine is a mitsubishi minicar,i am in kenya,it doesnt have power and its taking alot of fuel,tha plugs are black .i have changed the cerburattor but the combustion,has a problem,i have changed plugs many...


I do not know this car, but this sounds like the car is running very rich. Too much fuel in mixture. You need to make sure the choke is off. I think I am correct in saying that this car starts up from cold very easily.. Then loses power as it warms up. Be sure the choke linkage is intact, and working correctly. Opening up when engine is warm.

If the choke is working correctly, then the problem must be the carburettor. You say it is changed, but there is too much fuel going in.

Dec 06, 2010 | Mitsubishi Minivan Cars & Trucks

1 Answer

Picture of the fuse box in a 2002 hyundai santa fe ecu #10 fuse keep blowing when start the car


hi, i need help in fixing my santa fe 2002 ,interior lights wont turn on if i turn the car lights on , the main dash board liths are ok but the remain eq like the gear light (P , R, D N) the air condition lights window switch lights , so at night i cant see the eq.
any idea how to start fixing ? location of the main light source ??
Many thanks

Aug 25, 2010 | 2002 Hyundai Santa Fe

3 Answers

Where in the hell does the antenna wire plug into on a 1990 chevy k1500 with factory radio, did not see a place on equalizer or radio itself.


In most cases the antenna plug directly into the back of the radio. But GM came up with this crazy 3 piece stereo system. You have the display/selector, the tape deck/EQ, and the tuner. The antenna will be pluged into the tuner which is buried deep into the dash above the acceleator slightly to the right. I have installed close to 100 stereos and this threw me for a loop. Follow the tape deck/eq wiring harness to find it. Happy hunting.

Nov 15, 2009 | 1993 Chevrolet K1500

1 Answer

Driver window stuck down. seems to want to keep going down but lost ability to move up. was moving upward slowly recenty.


need new window regulator. the plastic gear wheel broke off of the mount. good website for this item is at partstrain.com i just replaced myine last month. easy job.

Sep 23, 2009 | 2002 Pontiac Grand Prix

1 Answer

Chevy radio not working


Please check all of your fuses,There are 2 fuses for your radio,1 to supply ignition switched power and the other is a constant power supply for the radio memory.This fuse is usally a shared fuse with other devices that need constant power such as interior lights.

Aug 28, 2009 | 1992 Chevrolet K1500

1 Answer

Radio won't turn on - EQ lights flash


My Sebring radio won't turn on - it has power. The EQ lights flash - almost like a security code needs to be entered.

Apr 09, 2009 | 2001 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...