Question about 2010 Mitsubishi Outlander

Open Question

How do i change transmission filter/fluid on a 2010 mitsubishi outlander

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 26 Answers

SOURCE: changing transmission filter on 1999 mitsubishi diamante

You basically have to unbolt the oil pan and then replace the filter inside.

Posted on Jul 18, 2008

Ad
mcgyver468
  • 710 Answers

SOURCE: Changing transmission filter on Mitsubishi

FIRST YOU HAVE TO UNBOLT THE TRANSMISSION PAN ON THE BOTTOM OF THE TRANSMISSION. THERE WILL BE FLUID IN IT SO BE CAREFUL NO TO SPILL IT. AFTER THE PAN IS OFF YOU WILL SEE THE FILTER ON THE BOTTOM OF THE VALVE BODY. IT MAY BE BOLTED ON AS WELL. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK

Posted on May 03, 2009

  • 333 Answers

SOURCE: mitsubishi outlander cooling fans not operating

There is a Recall to replace your cooling fan module because of this concern.

Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.

Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.

If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.

Posted on Sep 10, 2009

  • 333 Answers

SOURCE: how do you reset change oil light on mitsubishi outlander

Turn the key off.

Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.

Press and hold the "info" button until the maintenance screen begins flashing.

Release the "info" button and then push and hold it it for one second.

Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.

Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.


Posted on Sep 11, 2009

  • 1 Answer

SOURCE: transmission filter location,2002 mitsubishi galant?

my 02 galant is leaking but all fluids a full

Posted on Dec 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission fluid in my radiator on 2003 Mitsubishi outlander


Hi normally this would mean that the fluid tank that the fluid runs through in the radiator has failed

Sep 14, 2016 | 2003 Mitsubishi Outlander

1 Answer

2003 mitsubishi outlander rough idle won't stay on and wont run with load


p0134 - Bad O2 Sensor or faulty sensor wiring

p0132 - Bad O2 sensor (Bank 1 Sensor 1)

p0401 - Exhaust Gas Recirculation insufficient

p0113 - Defective intake air temperature sensor/ clogged air filter/ faulty Mass Air Flow (MAF) sensor.

p0101 - Vacuum leak/ defective MAF sensor/ damaged intake manifold gasket

p0107 - Faulty Barometric Pressure sensor or its wiring system

p0758 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid B wiring problem or its valve

p0753 - Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid A wiring problem or its valve

p0736 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0735 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0732 - Transmission problem/ Low transmission fluid/ Dirty transmission fluid/ Shift Solenoid wiring problem or its valve/ Transmission hydraulic control circuit

p0720 - Damaged speed sensor/ its harness/ connector

Jun 12, 2013 | 2003 Mitsubishi Outlander

1 Answer

How change automatic transmission filter


You will need to remove the Transmission pan to get to the filter. Here is a step by step guide on replacing the trans filter

Oct 14, 2010 | 2004 Mitsubishi Outlander

1 Answer

I just need to know what kind of transmission fluid i need to put in. in a Mitsubishi outlander 2003


YOU HAVE TO LOOK IN OWNERS MANUAL OR FACTORY MANUAL IN GLOVE COMPARTMENT.IT WILL TELL YOU WHAT TYPE TRANSMISSION YOUR VECHICLE USE.IF YOU DONT HAVE A OWNERS MANUAL YOU CAN CALL MITSUBISHI SERVICE DEPARTMENT.THEY WILL LOOK IT UP AND TELL YOU.

Mar 04, 2010 | 2007 Mitsubishi Outlander XLS

2 Answers

Where is the transmission filter on 2003 mitsubishi outlander


It is inside the transmission, you have to get under the car, drop the oil , if it has a plug, or drop the pan, oil will leak for days, 2 or 3 bolts hold the filter in place, take out the plastic plug if you find one floating around in the pan, and put it all back together.

Feb 18, 2010 | 2003 Mitsubishi Outlander

1 Answer

Cant find transmission flter on my car to replace it


you have to remove the transmission fluid pan-it is not an external filter
first remove the transmission drain plug and then remove the pan-you can then remove the filter and transmission pan gasket

Feb 18, 2010 | 2003 Mitsubishi Outlander

1 Answer

Hi I need to make tune up to automatic transmision for Mitsubishi Outlander 2003 but the auto parts told me this auto don't need this tune up


Engines get tuned up. Transmissions get the filter and fluid changed. The auto parts store guy misunderstood what you want to do.

Oct 09, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Fule filter mitsubishi outlander


the outlander does not have an external fuel pump the only one is in the fuel tank on the end of the fuel pump and it shouldnt need changed unless you have alot of trash in your tank inwich you will have to remove your tank to clean it out anyways

Jun 04, 2009 | 2004 Mitsubishi Outlander

Not finding what you are looking for?
2010 Mitsubishi Outlander Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...