2000 Mitsubishi Galant Logo

Related Topics:

Posted on Jan 13, 2013

Speedometer will not work in mits galant with a aftermarket radio

Installed new aftermarket radio and now the speedometer will not work?

4 Related Answers

Anonymous

  • 51 Answers
  • Posted on Jan 20, 2009

SOURCE: Speedometer doesn't work in my 98 Mits Galant and only warm air.

Well the speedo problem could well be behind the actual speedo gauge. Theres a long square shapped plastic piece on the end of the cable the fits in to the back of the gauge, as it turns it makes the hand on the dial read the speed, In most cases the plastic bit breaks away from the cable which will make the speedo read zero.You will have to get another speedo cable and replace it the same route as your original one.You have to take off the dash surround to get the gauge cluster out for a start to see if its broken at that end.

Ad

Anonymous

  • 4102 Answers
  • Posted on Aug 25, 2009

SOURCE: When you turn the key nothing happens but the

hi, the problem you are describing sounds like the starter motor has packed up or a wire might have even come off the back of the starter if your sure the battry is fully charged then the chances are the problem is with the starter motor, that is where i would start looking anyway

john h

  • 29494 Answers
  • Posted on Apr 08, 2010

SOURCE: is there a way to get a radio unlock code for 2001

need to notify a dealer for the code-- but call first they can also advise how to retrieve the radio id code or can advise of using the vin number of vehicle

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Aug 30, 2012

SOURCE: 2001 galant speedometer doesnt work with new radio

You found out the hard way that all the electronics in newer cars are lijnked togeather, my advice replace the radio with the factory unit.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 galant speedometer doesnt work with new radio

You found out the hard way that all the electronics in newer cars are lijnked togeather, my advice replace the radio with the factory unit.
1helpful
1answer

Why would water leak when running ac 02 mits galant

Ur evaporator drain tube is plugged it usually located under the hood passenger side fire wall use a piece of a coat hanger to get in there and un plugg it or compressed air will work to
0helpful
1answer

Dashboard cluster is not lighting up

I assume you put an aftermarket radio in. Did you buy a wire harness made for your vehicle or just cut wires? A lot of cars these days use a bus system that has other wiring tied into it.

Before adding an aftermarket radio to modern cars, do a little homework into whether you need a special harness or not.
0helpful
1answer

2002 Mitsubishi Gallant - installed after market stereo with wire nuts. Stereo works great, but the dash lights are out. Any Help?

pull the radio back out and remove the wire marked dimmer control on the aftermarket radio then replace fuse
1helpful
1answer

My Mitsubishi Galant 2008 2.4L reads AMP ECOM on the dash then the message goes and nothing is affected in the car.. what does this message mean?

My 2004 mitsubishi galant radio stop working and displayed a e comm message after getting a new battery installed, how do I get the radio to work?? please help
0helpful
1answer

Is there a way to get a radio unlock code for 2001 Mits. Galant without taking the radio out and looking for serial number?

need to notify a dealer for the code-- but call first they can also advise how to retrieve the radio id code or can advise of using the vin number of vehicle
0helpful
1answer

How do I find out the radio code for a 1999 Mitsubishi Galant? I had to change the battery and now need to reset.

Hi,

If it was factory fitted (installed at time of first registration), then you will need to refer your request back to your local Mitsubishi Parts Dept., who will have your radio code on their database. You will need to prove you are the owner of this vehicle.

If it is aftermarket, then you need to track down the previous owner/supplier for the code.

Cheers,
4helpful
1answer

When you turn the key nothing happens but the battery shows full charge and all lights, radio etc work. Its a 2002 Mits Galant

hi, the problem you are describing sounds like the starter motor has packed up or a wire might have even come off the back of the starter if your sure the battry is fully charged then the chances are the problem is with the starter motor, that is where i would start looking anyway
1helpful
1answer

Speedometer doesn't work in my 98 Mits Galant and only warm air.

Well the speedo problem could well be behind the actual speedo gauge. Theres a long square shapped plastic piece on the end of the cable the fits in to the back of the gauge, as it turns it makes the hand on the dial read the speed, In most cases the plastic bit breaks away from the cable which will make the speedo read zero.You will have to get another speedo cable and replace it the same route as your original one.You have to take off the dash surround to get the gauge cluster out for a start to see if its broken at that end.
Not finding what you are looking for?

49 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...