Question about 2002 Mazda Protege

1 Answer

Left front door auto lock-unlock only buzzes. How remove door?

On my Mazda 2002 the driver side door has a switch that locks or unlocks all other doors. It works fine on all doors except the front passenger side. All the solenoid there does is buzz. The door can be locked or unlocked manually. How do I remove the door panel for access?

Posted by on

  • 4 more comments 
  • h1matthe Apr 02, 2009

    My rear driver side door does the same thing, It was fine yesterday but today when i hit the auto-lock it made a grinding /buzzing sound. I can lock it manually thank goodness. I am told by Mazda it is a 600.00 dollar fix. THEY MUST BE JOKING! and that's just for labor i am told. so i guess i am stuck with it. any ideas?

  • bedvant Apr 15, 2009

    I'm trying to get the rear panel off of my 02 protege, I'm stuck on trying to loosen the handle. There is a small rectangle gap underneath the handle, but no screw to loosen. My lock also buzzes

  • Anonymous May 11, 2009

    same problem. i cant remove the handle on the rear door of my 2002 protege

  • Anonymous Mar 17, 2014

    All other doors lock and unlock with the remote but the front right hand door remains unlocked

  • Anonymous Mar 29, 2014

    Driver door and hatch will not unlock

  • Anonymous Mar 31, 2014

    replaced battery and still doesn't work

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off

Posted on Jan 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick 2002 LaSabre Custom all windows do not go up and down, door lock/unlock switch drivers side does not work(passenger & rear doors lock/unlock door switches work, trunk release button does n


coulb be the control switch on your panel you can take the door panel off and check for loose connections and try to test for continuity. if you dont know how take it to a shop and have them diagnose the electrical. im quite sure it the switch that burnt out

Oct 24, 2012 | 2002 Buick LeSabre

1 Answer

Keyless entry not working


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. Remove key from ignition switch. Close all doors. Open driver's door. Carry out the following within 24 seconds: Turn ignition switch ON and back to LOCK position 3 times. Remove key. Press and release driver's door courtesy light switch 3 times. Ensure doors lock and unlock. If not, wait 40 seconds and repeat procedure starting with driver's door already open. Press each remote control lock or unlock button twice. Ensure doors lock and unlock after each remote control operation. If not, proceed as follows: Press and release driver's door courtesy light switch once. Ensure doors lock and unlock twice. Repeat procedure starting with driver's door already open.
NOTE: A maximum of 3 remote controls can be programmed.

Mar 29, 2010 | 2004 Mazda 6

1 Answer

The auto-unlock is not functioning, but the auto-lock is.


ok the switch on the drivers side not working is the problem,its not allowing the cicuit to be completed.you may want to check the passenger side lock actuator.

Sep 09, 2009 | 2003 Kia Optima

1 Answer

Master door switch? or something else? buzzes when i press lock


ok ur door lock switch isnt going out,,however ur drivers front door lock actuator is going or is already bad...have that replaced..also as far as the end noise buzz u hear , that may be ur a.b.s modulator and accumulator cycleing on and off..it may be empty and or leaking..have the a.b.s modulator and accumulator checked at the dealer..its an expensive fix... ur modulator unit in in the front left or right of the vehicle depending if u have a v6 or 4 cyl. its a square unit with a rectangular brake fluid resevroir and a long tubular cylinder (acummulator)... also identify it by the orange connectors...and the brakelines going to it...common symptom with those accords....they leak alot especially if with high mileage..

Apr 09, 2009 | 1996 Honda Accord

3 Answers

Program remote control for mazda mpv 2002


Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Dec 06, 2008 | 2000 Mazda MPV

1 Answer

Programming keyless remote


2003-04 Mazda 6 REMOTE PROGRAMMING


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

Good Luck.

Jul 12, 2008 | 2003 Mazda Mazda6

2 Answers

Keyless entry remote


Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Jun 20, 2008 | 2002 Mazda Protege

Not finding what you are looking for?
2002 Mazda Protege Logo

1,168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...