Question about Cars & Trucks

Open Question

Pct code p0060,p0161 what can i do to fix that

I keep erasing them but hitch time i start the mtor there coming back

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: codes p0060/p01710/p0174 what should be the fix

P0060 : HO2S Bank 2 Sen 2 Heater Resistance
P01710 : To Many Numbers
P0174 : System Too Lean (Bank 2)

Posted on Oct 09, 2012

  • 128 Answers

SOURCE: 2003 Ford Explorer keeps coming up with P0060 Ford
Hope this helps! It could be the wrong sensor you replaced. Try swapping sensors around to see if it registers a different sensor. One major point is to make sure you have the required 12 volts going to the sensor! You can buy 500000000000 different sensors and if it does not get 12 volts its not going to clear the code.

Posted on Sep 13, 2013

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you reset a pcm on a 2004 volkswagen jetta

Pull the battery negative cable of for 30 minutes. This erases the keep alive memory and set it to factor defaults. If you are want to erase codes and get the check engine light off. You need a code reader or scanner. If the problem has been fixed. The light will come back on if not fixed.

Feb 06, 2015 | Volkswagen Cars & Trucks

2 Answers

Service engine soon light keeps coming on

It won't reset or erase code by disconnecting the battery
you need a scanner able to erase code

hope it help

Jan 08, 2014 | 2005 Pontiac Grand Am

1 Answer

2000 Jeep Grand Cherokee codes p0132 p0141 p0152 p0161 Keep Coming Back

Then the problem, is not fixed and needs further diagnosis using special equipment..

May 31, 2013 | 2001 Jeep Grand Cherokee

1 Answer

Codes p0060/p01710/p0174 what should be the fix

P0060 : HO2S Bank 2 Sen 2 Heater Resistance
P01710 : To Many Numbers
P0174 : System Too Lean (Bank 2)

Oct 09, 2012 | 2004 Ford F150

1 Answer

03 montero code 161

Hi there:
P0161 - Oxygen O2 Sensor Circuit Low Voltage (Bank2, Sensor2)

Other details here:
- P0161 - Delhpi (pdf)

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 21, 2012 | 2003 Mitsubishi Montero Sport

2 Answers

I had all these codes come up and i dont know what they mean. Dont think its good. P1747,P0743,P0750,.P0755 ,P0760, P0765 P1451,P0133, P0135, P0141. P0153, P0155,P0161, P1409, P0302, P0303, P0304, P0171....

looks like most of you trouble is the "oxygen sensor". it in the exhaust pipe, about $25 PLUS. Changing it may very well help most of your other code problems, I would start there, it is a simple fix, you then need to clear all codes and see what comes up after replacement. You may come out very lucky.
P01747 is transmission pressure control solenoid P01451Lack of Response From Passive Anti-Theft System Module - Engine Disabled P0743Torque Converter Clutch System Electrical failure.
Do the Oxygen Sensor first as go from there.
Good luck

Sep 17, 2011 | 1998 Ford Explorer

1 Answer

I change the crank position sensor and now get the code 443 and 161 and i can't erased and a won't start

P0433....Heated Catalyst Efficiency Below Threshold (Bank 2)

P0161....O2 Sensor Heater Circuit (Bank 2 Sensor 2)

you have a problem with the O2 sensor but as for it not starting then iam not sure as i cannot see this from stopping the engine from starting ,check the crank sensor with a automotive multimeter to see if its producing a voltage

Mar 22, 2011 | 2000 Hyundai Sonata

4 Answers

Dakota 4.7 P0161 code? What does it mean

P0161 02 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)
check the wiring to the bank 2 sensor, that is the one behind the catalytic converter on the opposite side from the bank where #1 cylinder is located, see firing order diagram below.

Apr 30, 2009 | Dodge Dakota Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides