Question about Nissan Sentra

Open Question

Nissan sentra bank 2 sensor 1 wire color codes

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
theapeman
  • 1 Answer

SOURCE: PO137, PO 138 codes

well on my car these are reffering to the sensors in the exhaust, the upstream sensor(before the cat) and the downstream sensor(after the cat) the downstream sensor can act up if it is lazy or sluggish, or due to a bad catalytic converter or a clogged one. however there are sensors on the exhaust manifold which are determined by driver side or passenger,my opinion is to get a scanner for about $100 to $150 and you can figure out many of these codes yourself.

Posted on Sep 19, 2008

Ad
johnny5846
  • 379 Answers

SOURCE: location of a o2 sensor 2001 nissan maxima

bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .

http://www.autozone.com/N,26200242/shopping/specsSelect.htm



Posted on Jan 04, 2009

  • 112 Answers

SOURCE: 2002 Pontac Grand Prix GTP P0171 code engine stumbling at times

Bank 1 is the frt side exhaust manifold (did they say bank 1 sensor 1?),you can start by replacing that sensor,i would check the intake for leaks ,the gm 6cly. are known for bad intake gaskets,you will see oil coming out form the frt or rear of the intake,also check your atifreeze overflow bottle for bronwish sludge,which means that the oil is mixing with the antifreeze.A leaking intake could cause that lean condition.

Posted on Mar 29, 2009

emissionwiz
  • 77201 Answers

SOURCE: Replacing bank 1 sensor 2 and bank 2 sensor 1 oxygen sensors

BANK ONE IS THE REAR BANK OF CYLINDERS AND TWO THE FRONT BANK

Posted on Jun 24, 2009

  • 1986 Answers

SOURCE: 2000 Nissan Sentra 1.8 with P071 trouble code, too

do you mean P0171??
If so, then it means your MAF sensor may be dirty and needs to either be cleaned or replaced.
It could also mean there's a vacuum leak downstream of the MAF sensor

Posted on Oct 13, 2009

Testimonial: "Confirmed what I suspected. Thanks, Lesjude"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change the engine of a Nissan Sentra 2004. And now appeared codes P1031 p1148 .. Maybe because the car had a federal motor and the other is California?


code p 1031 refers to heated oxygen sensor(HO2S) bank 1--heater --voltage low===causes --wiring---HO2S
code p 1148 refers to closed loop control--bank 1- inoperative === causes ---wiring---HO2S--- ECM
I am think that you haven't connected the harness up properly
or damaged the wires to the HO2S when disconnecting the harness

Apr 19, 2016 | Nissan Cars & Trucks

1 Answer

P1273 Manufacture contr fuel air metering 2004 nissan sentera


P1273 Nissan P1273 Nissan - Air Fuel Ratio Sensor 1 Lean Shift Monitoring Bank 1 Possible causes
- Faulty Air fuel ratio (A/F) sensor 1 Bank 1
- Faulty Air fuel ratio (A/F) sensor 1 heater Bank 1
- Fuel pressure
- Faulty Fuel injector
- Intake air leaks
- Faulty Air Flow Meter
Most probable is you have a bad heater in your upper bank 1 O2 sensor. Replace all of your O2 sensors.

Read more: http://engine-codes.com/p1273_nissan.html#ixzz3lgP7CTD8
Read more: http://engine-codes.com/p1273_nissan.html#ixzz3lgOwiMU8

Aug 27, 2015 | 2004 Nissan Sentra 1.8

1 Answer

O2 Sensor Bank 1 Sensor 2 location


standing in front of the vehicle looking at the engine bank 1 sensor 2 is the sensor after the cat converter on the bank on your left
bank one is the left cat ---bank 2 is the right cat. Sensor 1 is the one before the cat and sensor 2 is the one after the cat on either side

Mar 14, 2014 | 2000 Nissan Sentra

1 Answer

What is the fix for p0138 on 2006 nissan sentra se


Po 136 ---is an oxygen sensor code for a sensor
on Bank #1 Sensor #2

Nothing to do with MAF

Also education & solutions can be for using Google

Put in------ OBD2 Codes PO138 nissan sentra

Mar 11, 2013 | Cars & Trucks

1 Answer

What does this mean p0141 for2001 nissan sentra


COULD BE OXYGEN SENSOR.Trouble Code: P0141

HO2S-12 (Bank 1 Sensor 2) Heater Circuit Malfunction

Possible Causes:


HO2S heater control circuit is open or shorted to ground.HO2S heater control circuit is shorted to power.HO2S heater is damaged or has failed.PCM has failed.

Jan 20, 2013 | 2001 Nissan Sentra

1 Answer

2000 sentra p0134 & p0154 codes


This combination of codes indicates a wiring issue. Trace the wires from the sensors to find a broken wire.

Oct 20, 2017 | Nissan Sentra Cars & Trucks

2 Answers

Which sensor is the bank 2 sensor 1 for a 2001 nissan sentra?


Unless I am missing something the 2001 nissan sentra has two four cylinder engine options.

The bank refers to which side of the engine. a four cylinder only has one bank so there can only be a bank 1. A v-6 or v-8 will have two banks since there is a bank of cylinders on each side of the engine. So there will be a bank 1 which is always the same side of the engine as the number one cylinder, and a bank 2 which is always the other side of the engine.

Sensor refers to upstream or downstream of the catalytic converter. Sensor one is upstream or before the cat. Sensor 2 is downstream or after the cat.

If you entered the wrong year or wrong vehicle or if you can post the actual code I will see if I can help you further.

Sep 17, 2011 | 2001 Nissan Sentra

1 Answer

Location of o2 sensor bank 1 sensor 2


Bank 1 sensor 2 is the O2 sensor behind the catalytic converter.

Apr 08, 2011 | 1999 Nissan Sentra

1 Answer

Where is 02 bank 2 sensor 1 placement on a 2001 nissan sentra


Bank 1 means it's on the same side as your cylinder 1
Sensor 1 is the sensor that is located before the catalytic converter.

Sep 10, 2009 | 2001 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...