Question about 2003 Nissan Sentra

2 Answers

Hey I just bought a 2003 nissan sentra se-r spec v with 130k When im driving the power cuts off at 2.5RPM. if i switch gears under2.5, it runs smooth. Also, when i rev the engine in nuetral, it doesthe same thing. Any ideas? It passed safety and emmisions.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2003 nissan sentra se-r spec v with 130k

When im driving the power cuts off at 2.5RPM

Posted on Feb 25, 2009

  • SungKim Oct 16, 2011

    I had actually same problem except my problem was on and off, usually restarted when it did that sometimes it worked sometimes it didn't. anyhow my problem was my replacing maf sensor i got em used at the junkyard for 150

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Most times when you have a cut in power when the RPM's are high that's most likely a "SPARK" problem. However it can also be a "GAS " problem. Does check engine light come ON if it is or even if it NOT ON there can still be a Code stores in your computer. My first thing would be a BAD CRANK sensor/CAM sensor. This is my recommendations you should have this vehicle place on a code scanner/computer AUTO-ZONE does this check for free then get the codes if any is present and get back to me asap. I strongly thing it would be a crank sensor but if not there is a 20% chance its a FUEL PUMP can meet the demand when you hit the gas therefore then engine starves and dies. LEt me know how you made out. Good Luck and Thanks for using FIX YA

Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought a 2003 nissan xterra it wont go in reverse all other gears work fine


HOW TO: 2000-2006 Nissan O/D (Transmission) Diagnostic ...

? 3:00
www.youtube.com/watch?v=BqyUIN1EWvI
Nov 14, 2011 - Uploaded by NJ LIFE-HACKER Hey man I got a 2000 maxima when I first turn the key on or start the .... 2004 nissan sentra 1.8 automatic transmission i did the diagnostic like in video and same results as you tranny is good. But the reverse gear does not work and i have lost power. .....2000 maxima/i30 transmission solenoid no 3rd&4th!

No reverse gear, please help - Nissan Forum



Sep 25, 2015 | 2003 Nissan Xterra

1 Answer

What causes a rough idle on a 2003 Nissan Sentra Spec-V? Car otherwise runs fine while driving.


The rough idle is associated with the p011 code. The P011 code is: Camshaft A over advanced. There is a mechanical fault with the intake camshaft.
You need to take the car into a mechanic, preferably the dealer since they have all of the needed special tools, to properly diagnose and repair the issue.

Jul 25, 2014 | 2003 Nissan Sentra

2 Answers

I have a 2003 Nissan Sentra SE-R and the engine keeps sputtering while i am driving and the diagnostic pulled the P0335 code indicating that my CKP is malfunctioning but i just replaced it and it is doing...


Note - not a solution..just adding my woes!
I drive a 2003 Nissan Sentra SE-R Spec V.
My car suddenly stalled 1 day and the engine wouldn\'t turn over. Brought it to my mechanic and had the Camshaft position sensor replaced by my mechanic. The car ran fine for about 2 weeks and then the light was back on with the initial symptoms.

Took the car into the dealership and they diagnosed it again as P0335. Said that the mechanic hadn\'t installed the sensor correctly. Charged me a bunch of money to replace the thing and not too long ago the check engine light is on. The Revs bounce around everywhere. Checked the code again and it\'s P0335 yet again! Am in talks with the dealership to get to the bottom of this...

Apr 19, 2010 | 2003 Nissan Sentra

2 Answers

I need the Torque Specs for a Nissan Q-R 2.5 Engine?


Nissan QR 2.5 engine produces a torque of 180 ft·lbf (244 N·m) of torque at 4000 rpm .

Oct 11, 2009 | 2003 Nissan Sentra

1 Answer

2003 Nissan Sentra SE-R Spec-V clutch sticking and hard shifting


I am dealing with a very similar issue on my 03 Spec V , So far i noticed the clevis pin was loose and the locking hitch pin that slips thru it had fallen out . this caused the gears to not wanna engage due to the bolt behind the clevis which runs to the master cylinder was not getting pressed in when i pushed the clutch pedal in because the clevis pin was slippin on n off giving me no pressure up top .. I had to remove my lower dash panel in order to get visual n hand access to this pin , it is a tight spot to work in as well . May be easist to remove the 4 14mm bolts that hold yur driver seat in to give ya more room to work n stretch out ur arms

Sep 19, 2009 | 2003 Nissan Sentra

1 Answer

My 2003 Nissan Sentra spec v dies when idling


try replacing the crankshaft and camshaft sensers, my 2004 sentra spec v had the same problem.It cost me $122 for both the sensers and can be done in 20mins

Jun 14, 2009 | 2003 Nissan Sentra

1 Answer

2003 nissan se-r spec v POWER LOSS


sounds like a computer module problem . have the computer diagnostic scan done at your nissan dealer. good luck mister bill

Jan 23, 2009 | 2003 Nissan Sentra

2 Answers

2003 Nissan Sentra SE-R Spec V


I have the same car and I know there was a TSB for the ECM . I know the ECM issue has cause some cars to stall while driving

Jan 22, 2009 | 2002 Nissan Sentra

Not finding what you are looking for?
2003 Nissan Sentra Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...