Question about 1998 Plymouth Voyager

1 Answer

Dont have a referance mark for the drive plate on plymouth 3.3L

Ineed to install the drive plate on my 1998 plymouth voyager 3.3L.the problem is i dont have a referance mark to go off of . how do you get it on right if there is no mark made? does the crank and driveplate have a mark from the factory to match to?

Posted by on

  • 1 more comment 
  • joepeterson1 Jan 23, 2009

    flywheel,flexplate,driveplate=same

  • joepeterson1 Jan 25, 2009

    turns out the bolts are concentric, it can only be mounted one way.

    thanks joe

  • Roberta Smith
    Roberta Smith May 11, 2010

    define what you mean by 'drive plate"

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

I don't recall there is a specific mark for them... other then possibly a key on the crankshaft where you mount the flywheel... it's already balanced so that's not an issue... just make sure you mount it right side out.

Robert

Posted on Jan 23, 2009

  • Roberta Smith
    Roberta Smith Jan 25, 2009

    perhaps bump up my rating abit please ... as i feel i did answer the question to a reasonable degree



    thanks



    Robert

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

1998 Plymouth Voyager 2WD 3.3L MFI 6cyl idles very high


Clean the throttle body and if that doesnt work change the idle control sensor

Nov 19, 2014 | 1998 Plymouth Voyager

1 Answer

Which fuse is for brake lights on 1998 plymouth grand voyager


it should be marked on the cover for the fuse box. if it's missing then contact your local part's store and they can tell you

Jul 11, 2012 | 1998 Plymouth Grand Voyager

1 Answer

My 1998 plymouth voyager came with abs brake system, can I change it over to manual brakes? If so what is the best way to do this?


To answer specifically, this kindof already happens if your ABS system is not working. When the ABS system is not working your brakes should go into a "manual mode". You could have the ABS unit removed and new brake lines installed, but for a 1998 voyager, I wouldn't bother. Keep in mind though, you don't have anti-lock anymore. So drive this vehicle accordingly. Don't slam on the brakes and be ready to ease up on them if they should cause the tires to slip.

Dec 16, 2011 | 1998 Plymouth Voyager

1 Answer

What is the time belt ? why is it important to monitor it especially in used cars?


if thi plymouth voyager as a 3.3l eng it does not have a timing belt it as a timing chain does not require any maintenace as all like the good ol days ..if it as a 3.0l eng then it as a rubber timing belt that control the valve timing that reqires replacing every 80 to 100, 000 miles make sure you know what engine this van as if its a 3,3l it wi say it on top of intake or 3.5l is the same they both have chain ...3.0l does have a timing BELT

Aug 27, 2010 | 1998 Plymouth Voyager

1 Answer

I HAVE A 1997 PLYMOUTH GRAND VOYAGER. AND THE BACK UP LIGHT DONT


theres a reverse indicator sensor on the trans axle that tells the pcm to turn on those lites does the R on the icp illuminate when u put it in reverse?
(icp instument panel cluster) it my need a manual shift lever sensor to fix the problem

Mar 18, 2010 | 1998 Plymouth Grand Voyager

1 Answer

1998 plymouth grand voyager cruise control relay/fuse location?


Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.

Apr 10, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Front wipes are crazys,stop,dont stop.stop


there is an electrical switch that controls your wipers right under the steering wheel. dont recall the proper name.

Dec 20, 2008 | 1998 Plymouth Voyager

Not finding what you are looking for?
1998 Plymouth Voyager Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...