Question about 2004 Ford Taurus
High beam will work, but no low beam on 2004 taurus. tried new bulbs, fuses, etc. Any solutions?
Someone would need to check for voltage output on the dimmer switch for low and high beam.
Posted on Jan 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi. i recommend a thorough inspection of the wiring harness and harness connectors that led to the actual headlights. use a volt meter to test the current flow to the connectors. pull the connectors from the back side of the headlights and test all cooper contacts inside the connectors. If the wire contacts all show voltage, this will confirm a switch malfunction. it should be replaced in this case.
Now, if one or more contacts on the wires harness fail to produce any voltage, this will confirm a faulty wiring harness. replace the wiring harness in this case.
Make sure the headlight switch is in the on position when testing the wires.
Posted on Jul 30, 2009
just remove all the connections as it could be malfunction in the switches and the wirings needs to be rechecked to make it proper.other option could be bad dimmer switch. You will need to replace the turn signal/ dimmer switch as an assembly.to replace you will need to disable the air bag, drop the column, pull the wheel
Posted on Jan 10, 2009
SOURCE: I have a 2001 ford
There is a relay for the high beams that may be faulty. That relay is located in the power distribution box located under the hood of the vehicle in the engine compartment. The relay location will be in the "R5" position in that panel (see diagram of layout below). Other then that you could be looking at a bad switch or a wiring problem nut pretty sure this will be your problem. I hope this helps and good luck.
Posted on May 28, 2011
Tips for a great answer:
Apr 09, 2013 | 2003 Dodge Caravan
Mar 28, 2013 | 1991 Nissan 300ZX
Aug 12, 2012 | 2004 GMC Envoy
Dec 11, 2011 | 2004 GMC Envoy
Jun 28, 2011 | 2002 Chevrolet Suburban
Jun 08, 2011 | 2004 Chevrolet Cavalier
Dec 26, 2008 | 2004 Pontiac Montana
467 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: