Question about 2004 Toyota Corolla

1 Answer

Headlights not working (low beam) Fuses good.

Has not got daylight running lights. UK spec RHD. High beam is fine. All fuses in good order.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Have you checked the lamps...?

Posted on Jan 13, 2013

  • Sam Brown Jan 13, 2013

    bulbs are fine.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Headlights

I READ ONLINE THAT THERE WAS A RECALL ON THIS YEAR AND MAKE, CHECK WITH TOYOTA WEB SITES TO RECTIFY YOUR PROBLEM

Posted on Jul 25, 2008

  • 1861 Answers

SOURCE: Low beam headlights don't work

I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.

Toyota Ed

Posted on Jan 02, 2009

ourhowse
  • 2007 Answers

SOURCE: low beams dont work, only high beams do. 02 tacoma

If there is power there, then it has to be the bulbs. The trouble that most people have is, they don't see how both bulbs could burn out at once... and they're right. They don't. But you see vehicles with one headlight all the time. They don't know it unless you tell them or they happen to see it themselves. Then the second light burns out, and they think it's a major catastrophe, when in fact, it's just bulbs. The high beam still works because the bulb is double filament. The only other thing it can be is the dimmer switch, and since you switched it to high, it appears to be working. However, if it's not bulbs, it still could be the switch.

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No highbeams low works fine. changed switch but still the same fuses are good. help


98 Explorer No High Beams Problem - Ford Explorer and Ranger ...

https://www.explorerforum.com/forums/showthread.php?t=374129

Nov 15, 2012 - 16 posts - ‎8 authors
98 Explorer XLT 4X4 - No high beams. I've read thru many threads here and other places about this. Pulled and checked every fuse - all good ... Fog Lights Off When High Beams Activated - Normal?
19 posts
Nov 30, 2015
Headlights not working (not MFS, Fuses, or bulbs)
12 posts
Feb 24, 2015
97 explorer no low beams high beams
3 posts
Nov 4, 2013
no headlights in 96
15 posts
May 7, 2009
More results from www.explorerforum.com

Jan 03, 2016 | 1998 Ford Explorer

1 Answer

I have a problem with the low beams on my headlights. The high beams works just fine. All of the other lights(turn signal, emergency lights, etc.) work except for the low beams.


Check the fuses first. then replace the turn signal switch if all fuses are good. All the lights run threw it, except the high brake light on the rear.

Jan 01, 2015 | 2003 Ford Escape

1 Answer

My high beams work but my low beams and tailights do not


this circuit is fused also the headlight switch controls both functions for low as well as running lights

Aug 01, 2012 | 1986 Nissan 300ZX

3 Answers

Low beam head lights not working - The low beams, both stopped working. The high beams work fine. I checked the fuses and all 4 are good. I even swapped the low and high beam fises just in case. No...


if the fuses are good then you need to check for power and ground at the headlight plug that attaches to the headlight bulb if you have a good power and ground there and the connections are good then the bulbs are both no good.or if you can tell the bulbs are burnt out by looking at them then you don`t have to check powers and grounds.you also can directly feed power and ground to the bulb and check both the terminals for high beam and low beam as you cannot tell which is which by looking at the terminals

Mar 04, 2011 | 2001 Ford Focus

1 Answer

My low beams don't not work, only high beam. All other lights works fine. Problem started without any known issue. They were working just fine two nights ago. Where should I start? Is there a fuse or relay...


on a lot of vehicles theres a fuse for low and high beam headlights. could be a relay also. check the fuses in the fuse box. if both headlights have been changed and the fuses or relay are ok, then the problem is either in wiring or a bad dimmer switch. have a good day !!

Jan 27, 2011 | Dodge Dakota Cars & Trucks

1 Answer

98 ford lariat. Headlights stopped working. running lights come on and brake lights and turn signals. checked all fuses under dash and under hood, pulled out headlight switch and it looks fine. note only...


Is this both the high beams and low beams that do not work ?

If you checked all 3 fuses with a meter ( with the headlamp in Low position for both low beam fuses or in high for the high beam fuse ), the next items to test are the MFS ( MultiFunction Switch ) and the main headlamp switch ( test not look at it ).

The main headlamp test chart
568bbbb.jpg

The test chart for the MFS
4fc6f66.jpg
097ea29.jpg

Oct 25, 2010 | 1998 Ford F150 Regular Cab

3 Answers

Low beam not working but high beam is-Pontiac Vibe 2005


I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Jan 15, 2010 | 2006 Pontiac Vibe

2 Answers

Low beams stopped working


There maybe a headlight relay under the hood, most are in a protective box. There may be a fuse also under the hood. Ck the fuse if there is one and tap the relays with you low beams set to be on. Good Luck, Ned

Oct 09, 2009 | 1991 Buick Park Avenue

1 Answer

My 1992 Corolla DX headlights won't come on! I have changed the fuses and the bulbs. The relay clicks when turning the switch and the wiring seems to be in good condition but I am no electrician. The...


Power flows from the battery to the main fuse. Then it flows to the control coil and contact side of the headlight relay. When you turn on the headlights, the headlight switch provides ground to the control coil in the headlight relay and that operates the contacts. The contacts allow power to flow to the right and left hand headlight fuses. Power flows to the headlights. The headlight switch is what provides ground to the high and low beams on the headlights.

To diagnose, remove the headlight relay. Using a voltmeter, check for battery voltage on terminals 3 & 4 in the socket with the key in the RUN position. Then turn on the low beams. Test for good ground on terminal 1 in the socket. If you're not getting ground, then you've got a problem with either a bad headlight combo switch or a bad ground. If you get good ground on terminal 1, reinstall the relay, turn on the low beams and test for power in the headlight sockets. If you get battery voltage, that confirms you've got good fuses and wiring up to that point. Next, check for good low beam ground on the red/green wire in the bulb socket. If you're not getting good ground, it's either a bad combo switch or bad ground from the combo switch. Then turn on the high beams and check for good ground on the red/yellow wire in the bulb sockets.

It wouldn't hurt to clean the ID ground on the left side of the instrument panel, but based on everything you've said so far, this sounds like a bad combo switch

Jul 26, 2017 | 1992 Toyota Corolla

1 Answer

Headlights wont work


Fuse 22 and fuse 23 are left and right low beam headlamp fuses located in the PDC. 23 and 24 are high beam fuses. There is also a low beam and a high beam relay in PDC as well. If no headlights work I would check for main switch or multifuction switch (wiper/high beam) since each light has its own fuse and relay.

Jun 05, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
2004 Toyota Corolla Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...