Question about 2005 Mazda Drifter 2500

Open Question

Need torque settings on 2.5 td head

Cylinderhead torque settings

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

Hiya do you know the torque settings for cylinderhead for a bmw 525d e39 2002, 6 cylinder


Per BMW AG,
Jointing torque: 80 Nm
Loosen all bolts 1/2 turn
Jointing torque 50 Nm

http://www.adrianteo.com/files/cylinder-head-torque.pdf

Oct 05, 2014 | Cars & Trucks

1 Answer

Cylinder head torque settings


Thread Head bolt torque and sequence
Read the threads, but it states:
According to my manual the removal and the replacement sequence are different. Removal (looking from the cam sprockets )
headbolt 1-3-9-5-7 are on the left and 2-4-10-9-8 are on the right. Remove in that progression.
Instillation 9-5-1-3-7 are on the left and 10-6-2-4-8 are on the right tighten in that order.
Tighten to 25Nm or 18 ft/lb. and retighten the cyl hd blt 70 deg plus 70 deg plus 50 deg using the angular torque guage KM-470-B.
Hope this helps. Might help to make a sketch and label the 5 headbolts on each side.

Sep 03, 2014 | 2005 Chevrolet Aveo

1 Answer

REPLACING CYLINDERHEAD-TORQU SPEXS NEEDED


For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of theconnecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90 more
4. Check that the crankshaft turns smoothly.

Sep 11, 2012 | Cars & Trucks

1 Answer

I need the cylinderhead torque settings for 2004 1.3 city golf. Please assist


The head torque settings are 75 nm plus a further 90 degrees (102 ft/lbs)

The torquing sequence is:-

9 5 1 3 7
front
10 6 2 4 8

Mar 17, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Hi i need the torque setting for ford escort p reg cylinder head and cam bearing can you help


hi the cylinderhead torque settings are
STAGE 1, 30Nm (22l bf ft)
STAGE 2, 50Nm ( 337 lb ft ),
STAGE 3, angle tighten another 90 degrees,
STAGE 4 angle tighten another 90 degrees

Cant help you with the cam bearing though sorry

Dec 17, 2008 | 1998 Ford Escort

1 Answer

Cylinderhead bolts torque settings


According to my haynes manual for Landrover 200tdi, G - S reg,1989-1998 it goes as follows,
Stage 1:- Tighten all bolts to 30lb ft or 40Nm then
Stage 2:- Angle tighten a further 60 degrees then
Stage 3:- Angle tighten a further 60 degrees again.

Nov 29, 2008 | 1994 Land Rover Discovery

Not finding what you are looking for?
2005 Mazda Drifter 2500 Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...