Question about Cars & Trucks

Open Question

How to fix stiff hinges on siemens dishwasher

Door stiff on opening

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Door very stiff won't close tight

I have the same problem with the side doors of my 04 express. I put penetrating oil on the hinge pin with a hypodermic needle (hard to find). It is important that the oil gets into the hinge. I bent one set of hinges and broke a hinge because I waited too long to oil the hinge. The door may not close correctly because the hinge may be slightly bent. Keep all other hinges well lubed especially during the winter months when the hinges can be exposed to road salt. Fixing a bent hinge is difficult at best.

Posted on Jan 20, 2009

Ad
co7196
  • 3433 Answers

SOURCE: 1995 Chevy suburban back door hinges too stiff

Lubricate the hinge or the hinge will have to be replaced.. I recommend wd40 first, then a finger tip amount of grease on top of hinge pin. the oil from the grease will keep the hinge constantly lubricated. It's not too late.

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door on maytag dishwasher out of alignment on one side


You bent the hinges. So now you have to undo what you did or get new hinges.

Aug 28, 2017 | Cars & Trucks

1 Answer

My driver's door will no longer open. I noticed it had started to sag but saw no way to adjust it. What do I do? I have a 1999 Z71


the correct fix is to replace the door hinges
the next best fix is to loosen of the bolts that hold the door hinges to the door pillar and lift the lock side of the door
then while holding the door up , retighten the hinge bolts

Jan 05, 2017 | Cars & Trucks

1 Answer

The door on my 2007 7 series resists being pulled to the close position


The latch can be adjusted, but make sure there isn't something wrong with the seal or hinges.

Nov 14, 2017 | BMW 730d Cars & Trucks

1 Answer

The doors on my 1989 Ford Mustang (hinges) sanging. What is the fix for this? (maybe hinge pins or total hing replacement). Also, door handles outside stick and dont operate correctly? Idea fix?


You may need new hinge pins, replacement of the catch pin may be helpful as well. The plastic bushing on these tend to go bad letting the door hang lower and making it difficult for the handle to open the door.

JTRadiojunkie

Aug 12, 2010 | 1989 Ford Mustang

1 Answer

My 1999 vw beetles doors ae heavy to open and close very stiff


Use WD40 on the hinges and let soak in for ten minutes. wipe off the excess then apply White lithium grease to the hinged area and swing the door open and closed at least ten times to work in
The lubricants can be purchased at any discounted Hardware store to save money

May 17, 2010 | Volkswagen Beetle Cars & Trucks

1 Answer

Where is the gas lever on 94 golf


There is no lever for the fuel filler flap. It locks via the central lock of the car & is unlock when you unlock the car. There will be a finger access to pull the door open or push the door in & it will spring out.
The locking mechanism does fail to work & the door will be locked shut.
The owners manual has a description of what to do if the lock fails.
The hinge can seize up & be stiff to open.

Feb 13, 2010 | 1994 Volkswagen Golf

2 Answers

1995 Chevy suburban back door hinges too stiff


Lubricate the hinge or the hinge will have to be replaced.. I recommend wd40 first, then a finger tip amount of grease on top of hinge pin. the oil from the grease will keep the hinge constantly lubricated. It's not too late.

May 22, 2009 | 1995 Chevrolet Suburban

1 Answer

The driver and front passenger doors.


Spray white lithium grease on the hinges to free them up

Apr 11, 2009 | Saab 9 5 Cars & Trucks

1 Answer

Doors on my truck


You probably need new door hinges. Open the door, lift up on the door while watching the hinges, you should not see any movement at the hinge location. If there is play there, replace the hinges. To remove door hinges, place a floor jack under the door for support while u remove hinges. There should be some adjustment at the hinges, and door latch to fine tune the fit and how it closes. Good luck, let me know how u make out.

Nov 11, 2008 | 1999 GMC Sonoma

1 Answer

Door very stiff won't close tight


I have the same problem with the side doors of my 04 express. I put penetrating oil on the hinge pin with a hypodermic needle (hard to find). It is important that the oil gets into the hinge. I bent one set of hinges and broke a hinge because I waited too long to oil the hinge. The door may not close correctly because the hinge may be slightly bent. Keep all other hinges well lubed especially during the winter months when the hinges can be exposed to road salt. Fixing a bent hinge is difficult at best.

Aug 28, 2008 | 2004 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...