Question about 2002 Cadillac Escalade
I drove my caddy through deep snow, which was left by the snow plow, and the light came on. i didn't hear any noises like it was ice and something broke, it was soft snow that was recently plowed.
There are 4 sensors in each wheel , driving on hard old snow could cost damage to anything under car , the first thing I would check Is to see if they are all intact , second I would check if the are where the sensors are clear of any obstructions , check that are pulled broken , there other more tests to be done if the light still there , but it would require a multimeter and a lift to this , by testing unplugging each sensor and testing sensor resistance , while spinning the wheel you should have At least three the same resistance if one is bad it will have give either two much resistance or no resistance at all .
note :- this is just a general idea in what to look for , I didn't technically or physicllay looked at your vehicle and its spec's please becareful web working under car , car must be secured for your Saftey , good luck
Posted on Jan 15, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The problem is the wheel bearings that have the ABS sensor attached. Check the computer for the code as there is also an up date for the wiring sytem with a jumper for $60 fix that possible could solve the problem.
Posted on Nov 20, 2009
Posted on Feb 01, 2009
Hi. this is a very important alert. the stability system on this suv is very sophisticated. there are many sensors that work together with other modules and control units to keep this SUV from rolling over during an abrupt action, due to an extreme situation.This light is warning you of a appending fault that is occurring in one or more of the sensors on board. the best solution is to take your suv to the dealership for a brisk cpu scan. This way, you can find put which sensor it is that is malfunctioning and fix it.
Please rate and god bless:)
Posted on Apr 02, 2009
My Service Stability System Message along with the (ABS) Brake Light lit up on my dash, what can i do to fix it...Or what does this mean ?
Posted on May 07, 2010
Hello: To repair you need to know the code so you know what component is malfunctioning. Many things can bring the light on. Most generic scanners can not access the stability system. GM Tech 2 can.
Posted on Jan 10, 2011
Tips for a great answer:
Nov 27, 2015 | 2002 Cadillac Escalade Ext
Nov 16, 2012 | 2002 Cadillac Escalade
Feb 13, 2011 | 2002 Cadillac Escalade
May 06, 2017 | 2002 Cadillac Escalade
Jan 10, 2011 | 2002 Cadillac Escalade
Oct 02, 2010 | 2002 Cadillac Escalade Ext
Oct 18, 2009 | 2005 Cadillac Escalade Ext
Aug 20, 2009 | 2002 Cadillac Escalade
Jul 14, 2009 | 2002 Cadillac Escalade
Apr 02, 2009 | 2002 Cadillac Escalade
Feb 29, 2016 | 2002 Cadillac Escalade
116 people viewed this question
Usually answered in minutes!