Question about 2002 Hyundai Accent

2 Answers

Timing belt on my 2002 hyundai accent 1.6 liter 4cyl

The belt was changed on my 2002 hyundai accent 1.6 liter 4 cyl. and now the engine won't start.

Posted by on

  • Anonymous Mar 18, 2014

    How do I take off the check oil light for a 2002 Hyundai accent?

  • Anonymous Mar 19, 2014

    I need to replace the timimng belt in my 2007 hyundai accent

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

DID THE BELT BREAK AND THEN IT WAS CHANGED. If so then you may have bent valve. IF NOT then vehicle may be timed wrong. Here is a diagram of your timing marks, http://www.2carpros.com/car_repair_information/tec_info/2002/hyundai/accent/2002_hyundai_accent_timing_belt_diagram_marks.htm contact if you need more help. Thanks for using FIX YA

Posted on Jan 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 716 Answers

Was It Starting Before?
Who Changed It?

If The Belt Broke And The Belt Was Just Put Back On Without It Being Put In (TDC) Top Dead Center The Car Will Not Run. Warning! Trying To Start It Over And Over Will Destroy The Engine.The Engine Works By Being (TDC) Top Dead Center The Timing Controls When The Cylinders Come To The Top. The cylinders Are Controlled By The Timing So When The Spark Plugs Try To Ignite. The Cylinders Are Not In Position And Thus Will Not Create Combustion For The Engine To Run.

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

1 Answer

Is the 2002 hyaundai santefe a zero tolerance motor


The 2002 Santa Fe 4 cyl and 6 cyl engines are deemed "Interference" engines. If the timing belt should break or slip a few teeth, the pistons will strike the valves and most likely destroy the engine. Thus it is very important to change the timing belt every 80,000 - 100,000 miles (along with a replacement water pump). I recommend buying a belt/pump kit and having a local independent shop do the install (much cheaper than a dealer's $600 charge!).

Belt & pump kits are available via Amazon:
http://tinyurl.com/lqsqpwo

Starting in 207 Hyundai started shifting all of their engines to metal timing "chains"... more or less eliminating the possibility of such a problem. However, water pumps still go out... but not nearly as often or catastrophic a problem!
25592558-5eold4ui3lytmz02r5ph1yca-5-0.jpg

Mar 19, 2015 | 2002 Hyundai Santa Fe

1 Answer

Hyundai accent GVS timing belt given off


if the timing belt is broken it is very likely that engine damage will have occured ( bent valves)

Jun 12, 2010 | 2002 Hyundai Accent

2 Answers

Timing belt snapped


hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

Nov 28, 2009 | 2001 Hyundai Accent

3 Answers

I want to know how much oil I need for an oil change


start with 4 quarts and then check it
good luck ray

Jan 17, 2009 | 2006 Hyundai Sonata

2 Answers

2002 Hyundai Accent Problem


first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

Sep 28, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

2,301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...