Question about 1988 Ford Bronco II

2 Answers

Heat/AC doesn't blow in 88 bronco II

I have an 88 Bronco II and the heat/AC doesn't blow and the heat doesn't get warm at all. Windows fog up and now there is a strange smell in the car while driving. Help!!

Posted by on

  • Kdevine57 Feb 04, 2009

    I have an 89 ford bronco II and have no heat! after vehicle warms up, heat works but soon cools off. I have changed the thermostat, flushed system, backflushed the heater core, and serviced coolant. The floor on the passenger side does not get wet and the defroster does not cloud the window. Can the heater core still be the problem. The 89 bronco II does not have a heater control valve, so this isn't the problem. HELP!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have checked everything else, and your coolant system appears to be okay, try this.
Reverse the intake and outake hoses where they enter the firewall. All this does is reverse the flow through the heater core and will not harm the engine. Try it, it worked for me. Now I have more than enough heat. Let me know if this works for you.
Ken

Posted on Feb 06, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 267 Answers

Sounds like a bad heater core , your coolent may be low , check it out and add if needed . this will not fix your leak but you might get so heat untill you can check out the heater core

Posted on Jan 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

88 bronco II, heater hose going to water is cold, and my heater blows cold air, is my water pump going bad? the return heater hose is warm, it was heating once in awhile now it don't heat at all just cold...


I would try flushing heater core to see if it's plugged. I don't think it's waterpump, your rig would be overheating if it was. Leaking is most common waterpump failure.

Mar 06, 2011 | 1988 Ford Bronco II

1 Answer

When you turn on the heat it blows cold


Hello! Bring the engine to operating temperature...Turn the heat on high...Does the upper radiator hose get hot and hard?...Feel the heater hoses...Does one, both, or neither hose get hot?...

Send a comment...Guru............Saailer

Feb 09, 2011 | 1989 Ford Bronco II

1 Answer

Heat and A/C doesn't blow in an 88 Bronco II


The first thing to do is check the fuse. The fuse must be in the main fuse box. The position of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the fan fuse it should be around 20 to 30 amps.

Feb 06, 2011 | Ford Bronco II Cars & Trucks

1 Answer

Im not getting heat in my 1989 ford bronco II. i replaced the thermostat< and still only getting luke warm. im not getting drips in the passenger floorboards, and my windsheild isnt fogging, so i...


You could have an air bubble in the system. It is also possible that the heater core has debris blocking the flow of water. I would check to see that you are getting good circulation by checking the heater hoses near the firewall. If they are both getting hot then you may have an air baffle issue inside the heater box.

Dec 03, 2010 | 1989 Ford Bronco II

1 Answer

Electrical wire colors for ford bronco II


Best bet is to get a schematic to help you out.

Sep 02, 2017 | 1989 Ford Bronco II

1 Answer

Starter problems


I had a simular problem with a buick motor in my 68 jeep pick-up.The distributer shaft bushings were worn to the point of irradical fireing,even back firing dureing start-up and shattered the houseing on the new starter.It could advance your timeing and cause your motor to run hot and become har to start.GOOD LUCK! Idaho Gym.

Aug 28, 2008 | 1988 Ford Bronco II

1 Answer

88 Bronco ii won't shift into 4 wheel drive.


Check to see if you are getting power through your switch on your dash. I also suspect your shift motor but it is a lot easier to check it with a test light.

Jul 01, 2008 | 1988 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...