Question about 1997 Acura CL

Open Question

1997 acura cl engine hesitation at 5000 rpm

When I floor it, the car accelerates well until around 5000rpm then it acts like its restricted and sputters until it changes gears.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 87 Answers

SOURCE: Reset check engine light

You can do several Things to reset your check engine light. One is to simply pull the positive side of your battery cable off of the battery. Im going to say to just leave it off for about two minutes then place it back on tighten it down and your done. The other way is to bye a check engine light decoder. Are find one from a friend any way it has a reset option on it that will reset it. Ok your welcome good luck and may the force be with you.

Posted on Oct 07, 2008

Ad
  • 2 Answers

SOURCE: SRS light on 1997 acura CL

1.bend a paperclip into a u shape. 2.disconnect the yellow plug in your fuse box under the steering wheel and insert the paperclip into the plug that is now hanging there to complete the circuit.3.turn the ignition on and the srs light will stay on for 6 seconds, then turn off.disconnect the paperclip within 4 seconds after that and the light will come back on.4. reconnect the paperclip within 4 seconds and the srs light will turn off again.5.within another 4 seconds of it going off, disconnect the paperclip and the light will blink letting you know that you have completed all the steps right. you can also use some speaker wire

Posted on Mar 20, 2009

sheiden9
  • 87 Answers

SOURCE: check engine light

yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Posted on Apr 04, 2009

c17hydro
  • 2984 Answers

SOURCE: how to locate the thermostat for a 1997 acura 2.2

Removal & Installation

  1. Disconnect the negative battery cable.
  2. Drain the cooling system into a suitable container.
  3. Locate the thermostat housing by following the upper radiator hose to the engine.
  4. Loosen the hose clamps then carefully detach the hose from the fitting.
If the hose is stuck, carefully use a pick to break the seal between the radiator hose and the housing. If the hose is deteriorated, replace it with a new one.
  1. Disconnect any sensors or switches that may interfere with the removal of the thermostat from the housing.
f163710.gif
Remove the thermostat housing bolts

120abfd.gif
Pull the water outlet neck away from the housing

d9be9b2.gif
Note the installed position of the thermostat, then remove it

  1. Unfasten the retainers, then remove the thermostat housing.
Some coolant may leak out of the housing as the seal is broken.
  1. Remove the thermostat carefully noting how it's installed.
  2. Clean the mating surfaces of the thermostat housing.
Many thermostat housing's are made out of aluminum alloy. A plastic scraper is very effective and will not harm such metals.
To install

1c8dd82.gif

A new gasket must be installed before installation

c732e7b.gif
Install the thermostat with the air bleed valve at the top

  1. Install the new thermostat and gasket.
Install the thermostat with the jiggle pin facing up. This acts as an air bleed and must be at the top of the thermostat to operate properly.
  1. Install the thermostat housing, then tighten the bolts securely.
  2. Connect the radiator hose and tighten the hose clamps securely.
  3. Install any remaining components, then refill the cooling system.
  4. Start and run the engine until it reaches normal operating temperature while checking for leaks.

Posted on Nov 03, 2009

Testimonial: "thank you very much on the solution, didn't take as long as i expected!"

  • 1 Answer

SOURCE: I replaced EGR valve on my 97 Acura 3.0 CL after

Good news, the EGR valve for the 97 Acura was recalled. If your car is under 150,00 miles you should be eligible to get it fixed for free. I had the same problem with my 97 Acura CL 3.0. After changing the EGR valve, I found out that the vavle itself was not the problem, but rather a blocked intake manifold. Talk your local Acura dealer.

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start my 1996 Honda accord the engine seems to sputter rpm gauge revs up on its own and spits and sputters as I'm driving down the road


My sputtering & stalling 1993 Honda Accord - YouTube

? 2:12
https://www.youtube.com/watch?v=Ki2H9aq8Xis
Jun 23, 2011 - Uploaded by mdpbfly
My sputtering & stalling 1993 Honda Accord ... 1996 Acura Integra, hesitation accelerating & misfire. ... 1993 Honda Accord Start Up and Review 2.2 L 4-Cylinder ... SIR B16A Engine sputter/ power loss at higher RPM - Duration: 1:14. by ... 1994 Honda Civic Check Engine Light Code Retrieval Tutorial ...

All comments on How To Solve Honda Idle Problems ...

https://www.youtube.com/all_comments?v=L788jKEVblY
What should I do if once I turn on my Ac my idle drops as if it's gonna die, and .... to a complete stop the rpms start going up and the car accelerates on its own. ... Honda Accord LX, and my Honda just started sputtering in idle. check engine .... My cousin replaced my radiator on my 90 civic and since then my temp gauge is ...

Acceleration Bog/Sputter/Hesitation - Honda-Tech

honda-tech.com/honda-accord.../acceleration-bog-sputter-hesitation-279...
Jun 11, 2010 - 1990 Honda Accord Ex F22 209000 miles, recent alternator change When I ... When I take off from a stoplight I get a little hesitation/bogging/sputteringfeeling until about 2,000 RPM then ... My 1999 Accord had a similar problem (F18B2engine). ... It only lasted a second or so before it would actually rev up.


Dec 28, 2015 | Honda Cars & Trucks

1 Answer

I have a 97 ACURA cl 2.2 and when I start my engine it the rpm idles to 1. Why is that?


unless the car is at operating temperature , the engine rpms on start is hiogher the at run as the ECM has a higer setting for idle ( like having a choke out a bit ) until the engine checks are done and then it settles back
best run the fault codes to check for faulty sensors

Apr 24, 2015 | 1997 Acura CL

1 Answer

1997 acura cl 2.2 revs up to 1500 rpm and down to 1000 rpm just several seconds after start


Cars are design to run at a higher idle at start up to warm them up quick. There is a sensor that reads water temperature and tells your car's computer how fast to idle. Your RPMs seem slightly high but not out of the norm. Does idle ever drop to around 600/800 after about a minute? If not, your engine temperature sensor maybe defective.

Mar 16, 2014 | Acura Cars & Trucks

1 Answer

Loses power when i accelerate


a 97 Acura Vauxhall,
is this a motor swap?
quote;
Problem with 1997 Acura CL Loses power when i accelerate

Nov 26, 2013 | 1997 Acura CL

1 Answer

97 acura cl shuts off when i go faster then 20 mph


some computers have a built in system that limits engine rpm to low speeds when an engine overheat occurs( Ford). Check for such a code. Check that there is water in the radiator and that the temp gauge is working

Jan 13, 2013 | 1997 Acura CL

1 Answer

Water leaking on floor 98 acura cl


The drain is in the engine compartment passenger side coming off the fire wall.

Jun 27, 2012 | Acura CL Cars & Trucks

1 Answer

Show me a diagram where a transmission control module is located for a 1997 acura cl


Your transmission is controlled b the same module that controls your engine. It is called the "Powertrain Control Module" It is located in the front passenger floor board. Pull the carpet back from under the dash on the passenger side and you will see it.

Dec 04, 2010 | 1997 Acura CL

Not finding what you are looking for?
1997 Acura CL Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...