Question about Cars & Trucks

Open Question

Wiring diagram for the nissan almera hazard switch

Hazard switch wiring

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: need a timing chain diagram for y reg nissan

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 20, 2009

michigan man
  • 3533 Answers

SOURCE: need a timing chain diagram for y reg nissan

try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 21, 2009

citroenchris
  • 600 Answers

SOURCE: Hazard Lights will not work.

Do you mean 58 is only live when the lights are on? if so there should be another perminent live, have you checked the fuses?

Posted on Aug 06, 2009

  • 1 Answer

SOURCE: nissan almera problems side light

heater blowing cold air only

Posted on Jan 04, 2010

emissionwiz
  • 75797 Answers

SOURCE: nissan almera ecu light

disconnect the battery negative cable for 5 minutes

Posted on Mar 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I Bought a Second-Hand Nissan Almera, But The Alarm Is Not Working, What Can I Do?


Nissan Almera alarm help??? ' AVForums

www.avforums.com > Forums > Lifestyle Forums > Motoring Forum
Feb 19, 2007 - Last night I went to drive home, switched the alarm off, unlocked the ...Remove negative terminal on battey for 3 minutes to reset your alarm.

Sep 15, 2015 | Nissan Cars & Trucks

1 Answer

No indication low oil levelproblems nissan almera


Could be a bad oil level sensor or possibly a wire problem going to the oil level sensor.

Aug 30, 2014 | 2001 Nissan Almera Tino

1 Answer

2010 Y61 ZD30 Patrol code P0090,P0088?


Check your wire diagram it could be IGN bad wire

Jun 23, 2014 | 2004 Nissan Nissan almera tino

1 Answer

Which fuse do I replace for rear window defogger in a 2001 nissan almera


There may be a fuse in the fuse panel under dash, but defoggers are often found with a circuit breaker rather than a fuse. There may also be a relay in the circuit to the rear window. You could pull off the connector at the window, and with key on and defogger switch on, check for power at the connector. If you have power, one of the grid wires on the window may be broken. Kits are available to fix that.
If no power at the window, IDK, may have to find a wiring diagram, or have an electrician or mechanic start looking into it. Good luck.

Dec 30, 2012 | Nissan Almera Cars & Trucks

1 Answer

How do i reset central locking on a micra 04 reg


Try the following:

"KEY FOB PROGRAMMING
NISSAN
SYSTEM DESCRIPTION
The Central Door locking is controlled by the Multi-Remote Control system which controls
the door locking, door super locking and hazard reminder. When the doors are locked and
unlocked the unit flashes the hazard lights once for lock and twice for unlock.
A maximum of four remote controls are allowed to be programmed.
ALMERA
ALMERA TINO
PRIMERA
MAXIMA
MICRA
SERENA
VANETTE CARGO
TERANO II
Ensure all the doors have been unlocked, either by using a good transponder key or remote
control plip key.
Procedure
1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.
2. Then turn ignition switch to OFF position. Leave key in ignition switch.
3. After 2 seconds, the system will enter programming mode and will flash the warning
lights twice.
4. Press and HOLD the unlock button on the Plip.
5. While pressing the unlock button, press the lock button 3 times.
6. Release the unlock button.
7. The warning lights will flash once to indicate successful programming.
8. Repeat procedure 4 to 7 for up to 4 plip key?s.
9. When completed turn ignition ON, and the warning lights will flash 2 times.
10. Remove key, and check all plip key?s for operation.
NOTE : The programming mode will stop when either the ignition is switch ON, 4 plip keys
have been programmed or no input signal either from the switch or plip keys has been received
for 120 seconds."

Mar 12, 2012 | Nissan Cars & Trucks

1 Answer

Disconnected wires - electric windows won't work


Go to local library and get the diagram (if they have a hanes manual etc). If not go to nissan dealer and fork out the 100 dollars for the shop manual. Best investment you will ever make.

Jun 03, 2009 | 2004 Nissan Sentra

1 Answer

2004 Frontier Turn Signal And Hazard Fuses Blowing


you have a short... a bad ground somewhere. sorry i cant be more specific but if you have a wiring diagram you can find the ground for this... possibly corrosion but unlikely. good luck

May 02, 2009 | 2004 Nissan Frontier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...