- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I just solved a similar problem on my 2003 Saturn. The tail light assembly had gotten wet on a stormy night with the trunk open. There was no problem until the weather turned cold. After looking at the fuses, relays, brake switch etc. I got my trusty voltmeter out. Testing the voltage on the light blue wires in my tail light connector I found the required +12Volts for the brake lights when the brake pedal was pressed. Checking the lamp sockets I found the 12 volts was still present when the brake pedal was pressed.
The water that leaked into the bulb connectors (right and left) and spread the contacts when the water inside them froze! Blowing out the water and pushing the contacts back together solved my problem! Lesson...Keep the trunk closed when it's raining hard and dry out the bulb connectors if they get wet.
if the drums were replaced then you have drum brakes the l200 saturns had two options for brakes anti lock brakes it has all disc brakes without anti lock it has disc on front and drum on rear hope this helps