Question about Hyundai Motor 2002 Elantra

1 Answer

Adjustment headlights '02 Hyundai Elantra

Can anyone tell me were I can find the adjusment screw for the headlights on a 2002 Elantra? I've replaced the Left light assembly and the low beam is a bit to high and to the left.

Posted by on

  • newyorker394 Mar 15, 2009

    OK-I've located the adjusment screws!! Now, looking at the headlight, which one will adj the low beam-it is high & to the left??

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Oct 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to replace a headlight


Your car is equipped with headlight unitsthat house the headlight bulbs, which illuminate the road during dark drivinghours or bad weather conditions. You just need screwdriver and replacementheadlight to do this job. This is how to do it First you Open the hood of the Elantra and locate the damagedheadlight unit. Look for a metal band that secures the unit in place. Removethe screws surrounding the metal band using a flat-head screwdriver. The bandwill pop off as the screws are removed. Remove the band completely by slidingit off of the headlight unit. 2nd, Remove the headlight unit by pulling it out ofposition. Disconnect the electrical connector, located on the back of the unit. 3rd , Insert the replacement unit into place and attachthe electrical connector. Place the metal band around the unit and secure theband by replacing each screw. Use the flathead screwdriver to tighten eachscrew. Repeat this process for the opposite headlight unit, if necessary. Closethe hood of the Hyundai Elantra.

Jan 13, 2011 | 2004 Hyundai Elantra

1 Answer

How to adjust 2004 hyundai elantra gt headlights


If you dont have the proper tool to do it,wait for the night come,locate on the top of each side of the eadlights the scrwes where you can adjus them,in a flat ground adjust the lighst.

Sep 23, 2010 | 2004 Hyundai Elantra

1 Answer

Can't find headlight adjustment screws


They nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.


Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Sep 17, 2009 | 2005 Hyundai Elantra

2 Answers

How to adjust 2002 elantra cdx clutch


There is Adjustment on the Clutch master cylander

Aug 15, 2009 | 2001 Hyundai Elantra

1 Answer

What is the cost to replace a cracked engine pipe in 02 elantra


suggest u call walts and Midas 2 get quotes as the prices can vary.

Good luck

Jul 02, 2009 | Hyundai Motor 2002 Elantra

1 Answer

Adjust Headlights Horizontally in Hyundai Sonata 2002


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Mar 01, 2009 | Hyundai Motor 2002 Sonata

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra


thats it my freind one on each side/Plaes rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Adjusting the low beam headlight on a 2003 Hyundai Elantra Adjusting the High beam headlight on a 2003 Hyundai Elantra


its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Jan 30, 2009 | Hyundai Motor 2003 Elantra

1 Answer

Headlight Adjustment


their are either torx screw above or below the headlight back cover one is for up and down and the other for rt and lt

Jan 24, 2009 | 1987 Hyundai Excel 4-Door

Not finding what you are looking for?
Hyundai Motor 2002 Elantra Logo

1,191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...