Question about Toyota Venza
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: remove the rear bumper
Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.
Posted on May 15, 2008
There is a screw on each side of the bumper cover at the wheel wells. It should be a 10mm. You might have to move the 1/4 liner over a bit to fond them. After those bolts are removed, you can pull the sides of the cover away from the quarter.
Posted on Jul 20, 2009
Tips for a great answer:
Oct 25, 2016 | Toyota Cars & Trucks
Oct 15, 2014 | 2010 Toyota Venza
Jul 23, 2014 | 2011 Toyota RAV4
May 26, 2014 | 2003 Toyota Corolla
Oct 07, 2013 | Toyota Cars & Trucks
Mar 19, 2013 | 2006 Toyota Sienna
Jan 24, 2013 | 2009 Toyota Venza
Oct 26, 2012 | Toyota Cars & Trucks
Sep 16, 2011 | 2010 Toyota Venza
378 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: