Question about 2005 Toyota Highlander

Open Question

CANNOT FIND TOOL TO REMOVE SPARE TIRE - 2005 Toyota Highlander

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a tire on a 1988 ford f-150


Before doing anything make sure you have air in your spare..,A good Jack and spare tire removal kit....The kit should be under or behind the passenger seat..I don't like the factory Jack it comes with because sometimes you need a good strong block of wood to achieve the height you need to contact the vehicle..and sometimes they don't work correctly...Some spare tire release tools are under the hood..It is a long skinny rod ...You have to use rod or rod kit to stick through the rear bumper at the slot and turn the rod counterclockwise after you feel the rod connect with the release mechanism..,Lower the spare until it touches the ground then keep turning so you can have enough slack to remove cable from spare tire...Set parking brake while in park and use the lug nut removal tool to break loose the lug nuts before raising vehicle..They are removed counter clockwise..Don't take nuts off just break them loose...Block front wheels for safety with anything solid you can find if you are stranded..If you can't find anything rely on parking brake..It should be safe in park but safety first....Jack vehicle up..,remove all lug nuts put them in a safe clean place don't lose them..Remove flat tire..Install spare..Start each lug nut and tighten them all tight by hand..Snug each nut clockwise in a star pattern ..Get them good and tight but don't try to hurt yourself or break the stud...Lower vehicle,remove Jack..Snug each lug nut once again for safety..Put flat in truck bed for now rather than back in the spare storage area because it has to be repaired..Crank spare cable that held spare under truck clockwise until it stops.Remove tool..,Gather all tools used., remove blocks from front tires.,Head to a tire store...

Feb 21, 2015 | 1988 Ford F 150

1 Answer

How do i remove the spare tire on a 2009 dodge ram


It should tell in your owner's manual. One of the factory-supplied tire changing tools may work for it.

Jun 13, 2012 | 2009 Dodge Ram Pickup 1500

1 Answer

How do i get my spare tire down? special tool? where?


Hello! Here is procedure to remove spare tire...Guru...saailer



  1. Park on a level surface and put on the emergency brake. If the car is near the side of a road, switch on the hazard lights.
  2. Locate the tire repair kit. It consists of a jack, a jack rod and a wheel nut wrench. In the regular cab, pull the entire seat bench forward. The tools are located behind the drivers seat. The King cab model has a tool case located directly behind the driver's seat. The Crew cab stows the tools behind the back bench. Pull the bench forward and remove the tools.
  3. Insert the square end of the jack rod into the square hole in the nut wrench. This gives the jack rod a handle.
  4. Find an oval shaped hole in the back of the truck under the middle of the tailgate. Look through the hole and find the winch for the spare tire. It is a circle with two notches.
  5. Insert the T-shaped end of the jack rod into the hole. Slip the T-shape into the double notched circle of the winch.
  6. Turn the jack rod counterclockwise to lower the spare tire to the ground.
  7. When the tire is completely lowered to the ground, remove the center retainer chain and pull the tire out from under the truck.
  8. Wind the jack rod clockwise to completely retract the retainer chain

Dec 18, 2010 | 2001 Nissan Frontier Crew Cab

2 Answers

How to remove spare tire on 2003 yukon XL


you need a tool that goes in a slot in the rear bunper

Jan 17, 2010 | 2003 GMC Yukon XL

2 Answers

Where is the spare tire on explorer


the spare is located under the rear of the truck right under the back bumper theres a special tool with your vehicle in the back storage compartment to let the tire down look under the hatch and youll see the slot where the tool is inserted

Jan 15, 2010 | 1998 Ford Explorer

1 Answer

I do not have a key to remove my spare tire. There is a lock built into rear bumper. Cannot access tire with tool to lower the spare.


if its an aftermarket lock drill out lock and remove if it came as a dealer option check glove box or jack area for spare key

Nov 15, 2009 | Chevrolet Tahoe Cars & Trucks

1 Answer

How do you take off the spare tire from a Plymoth Voyager?


THERE SHOULD BE A HOLE IN THE REAR BUMPER THAT THE TIRE TOOL FITS IN. TURN THE CRANK-TOOL COUNTERCLOCKWISE TO LOWER THE SPARE TIRE. WHEN THE TIRE IS DOWN, LIFT THE TIRE ENOUGH TO SEND THE CABLE LONGWAYS THROUGH THE RIM. I HOPE THIS HELPS. THANKS FOR USING FIX-YA. PLEASE KEEP ME POSTED. GOOD LUCK

Sep 01, 2009 | 1999 Plymouth Grand Voyager

1 Answer

Where can you get the tool that will lower the spare tire?


dealer for the tool but it must be on vehicle like under the spare wheel or drivers seat

Aug 22, 2009 | 2005 Dodge Ram 1500

1 Answer

How do I lower the spare tire on a 2002 4runner


Find your tire changing tools. Take the tool with the hook on the end and attach the longer tool to it. Find the oblong shaped hole on the back bumper. The hook end will go in here and connectt to the spare tire winch. A flashlight aimed through the hole will help lining it up. Attach the lug wrench to the end of the hook tool. Rotate counter clockwise until the wheel is down. Remove the part going through the center of the tire and remove the tire.

Jul 20, 2009 | 2002 Toyota 4Runner

1 Answer

Cant release spare tire from under car of 2002 mercury villager. no owners manual available.


Location of the spare tire and tools
The spare tire and tools for your vehicle are stowed in the following
locations:
Item Location
Spare tire Under the vehicle, just forward of
the rear bumper
Jack assembly Under the third row bench seat in
the tool bag
Removing the jack and tools
1. Lift the 3rd row seat cushion.
2. Remove the jack assembly from the bag under the seat.

Removing the spare tire
1. Open the liftgate, locate the U-shaped slits in the carpet, and flip up
the piece of carpet to expose the hex nut.
2. Insert the lug nut wrench on the
hex nut in cargo floor.
3. Turn the wrench
counterclockwise until tire is
lowered to the ground and the cable
is slightly slack.
4. Remove the retainer from the
spare tire. It may be necessary to
lift one end of the tire to disengage
the retainer

Jul 12, 2009 | 2002 Mercury Villager

Not finding what you are looking for?
2005 Toyota Highlander Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...