Question about 2002 Volkswagen Passat

Open Question

Misfire on 02 volkswagen passat cylinder 3 - 2002 Volkswagen Passat

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Selvol
  • 115 Answers

SOURCE: 1999 volkswagen passat

Not sure where a cheap Rubber elbow is located on a passat. But do take off the coil covers. They are located under the engine cover. They are the 4 square caps. They come off with a allen wrench i believe 5mm. Then pull them off. Due this 1 at a time. Once off look down the hole with a flashlight.
And look at the rubber surrounding the coil. Their should be no moisture.spellcheck.gif If their is moisture try blowing it out with compressed air.

Posted on Nov 23, 2008

Ad
  • 1596 Answers

SOURCE: misfire in cylinder 3

NO to the MAF Sensor Question, and Spark Plug Wires Or BOOT Will Cause Missfire. As For Mass Air Flow Sensor Easy Check is to Dissconnect it While Engine is Running And If ENGINE SMOOTHES OUT The Sensor is Bad

Posted on Jul 30, 2009

emissionwiz
  • 76691 Answers

SOURCE: what kind of oil goes into a 2006 volkswagen

In this engine use either 5W-30W or 10W-30W, use any name brand oil.

Posted on Nov 13, 2009

  • 119 Answers

SOURCE: 2000 Volkswagen Passat 4Motion 2001 passat v6

When were the sparkplugs,airfilter changed,is there damp in the coil packs or the seals worn allowing in damp.The maf sensor(mounted in airbox top) may be faulty or the throttle throat may need cleaning.Fuel contamination can play a part, how old is the fuel filter as they should be replaced every 2 years.Check that all vacuum pipes are secure and not cracked as leaks can add to the problem.

Posted on Feb 12, 2010

  • 136 Answers

SOURCE: how do I find the

On all vw model it located the @ the bottom line or radiator hose.

Posted on Dec 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix diagnostic code for 1999 vw passat po304 po305 po306


Hi. You have misfires on cylinders 4, 5 and 6. If there are no faults on cylinder 1, 2 and 3 then I would check the power to the left bank injectors. Also check spark plugs and ht leads. If there are running issues then this should be an easy fix. If the faults are very intermitant then it can be a bit tricky to isolate.

May 18, 2014 | 1999 Volkswagen Passat

1 Answer

02 passat rough idle cylinder misfires 1-3


did it misfire before the tune up? if not more than likely the firing order is wrong the wires we're put back onto the plugs incorrectly check the order other things that can cause this are fuel or even a vac. leak

Aug 27, 2012 | Volkswagen Passat Cars & Trucks

1 Answer

99 passat 1.8 turbo. has a misfired cylinder thats due to the computer.It still runs just very slow since only on 3 cylinders.shop says that it needs the computer replacement.which is roughly about 1500.is...


Doubt the computer is bad

Most likely ignition coils or ignition module

Computer will seldom cause a misfire

Take it to someone that knows what to do
to resolve

Jul 16, 2012 | 1998 Volkswagen Passat

1 Answer

1999 VW Passat 1.8 turbo Code #3 cylinder misfire. Replaced coil and all plugs, still have misfire...???


Coils and plugs are not the only things that can cause misfires. Misfires can be caused by vacuum leaks, low compression, faulty fuel injectors, clogged EGR ports (on vehicles with individual ports for each cylinder), blown head gaskets, burned valves...you can spend a LOT of money on parts by just going in and replacing things without diagnosing WHY the cylinder is misfiring.

Feb 27, 2011 | 1999 Volkswagen Passat

3 Answers

I have a 05 VW Pessat with a 1.8L 65K miles on it. I have a random misfire and surge at idle. Code's set: P0300, P0301, P0302 and I seen P0303. This misfire comes and goes. Does not have a dead miss. I...


Try the crank pisition sensor that is vary likely to be the couse of your misfires its working but its intermintly shorting out telling the pcm that you have a misfire and setting the codes

Nov 22, 2010 | 2004 Volkswagen Passat

1 Answer

I have a p0303 trouble code on my 1999 Passat. Missfire on #3 cylinder. Coil is ok, I'm lost.


coil packs very prone to failing... check compression for good readings (at least 100 - 120psi) if okay try new spark plug as these can fail under load and its the cheapest part to replace to eliminate. if misfire still present swap cylinder 3 coil with cylinder 1 coil and see if fault code moves to cylinder 1. hope this advice helps

Jul 17, 2010 | 1999 Volkswagen Passat

1 Answer

My 2004 passat started running ruff and i checked the codes and got p0011 and p0303? 96000 miles I think it may be the timing belt but I dont want to change it for nothing???


If you haven't changed the timing belt at 60,000 miles then you NEED to. The P0303 is cylinder 3 misfire. If the plugs have not been changed, time to inspect and change.
  • P0011 "A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
  • Cure the misfire first and clear the codes. The misfire could be what is causing the other code.
  • Mar 16, 2010 | 2004 Volkswagen Passat

    1 Answer

    2003 vw passat wagen 4 motion 6 cl i have a #1 cl misfire what should i do first


    Check the spark plug for that cylinder, the wire and coil. Also check for any vacuum leaks around that cylinder. See my "How To" on finding a vacuum leak.

    Mar 13, 2010 | 2003 Volkswagen Passat

    1 Answer

    Misfire in cylinder 3


    NO to the MAF Sensor Question, and Spark Plug Wires Or BOOT Will Cause Missfire. As For Mass Air Flow Sensor Easy Check is to Dissconnect it While Engine is Running And If ENGINE SMOOTHES OUT The Sensor is Bad

    Jul 30, 2009 | 2001 Volkswagen Passat

    Not finding what you are looking for?
    2002 Volkswagen Passat Logo

    Related Topics:

    72 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volkswagen Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    yadayada
    yadayada

    Level 3 Expert

    76691 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Volkswagen Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...