Question about 2001 Porsche Boxster

1 Answer

1997 boxter air conditioning control

Had my liquid crystal display a/c control replaced and it is reading in Celsius. How do I get it to read Farenheit?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Via the system tester me thinks but i'm sure it can be done via the dasboard look in the handbook think it might say in there

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing the external temperature gauge from Fahrenheit to Celsius


If your temperature reads in climate control reads in degrees Celsius "C" instead of Fahrenheit "F", follow these steps to change to Fahrenheit.

  • Turn the ignition on.
  • With the climate control turned on, push and hold the recirculation button in. While holding the button in, push and hold the off button in for 3 seconds or until you hear a beep.

The display should then change to "F". Follow these same steps to change your read-out to Celsius , if preferred.

Sep 21, 2012 | 2005 Land Rover LR3

1 Answer

Air conditioning has been drained but won't accept new refrigerant


place the A/C system into a vacuum and let sit for a few hours... to see if the (negative) pressure reading changes durring that period.

With the system in a vacuum... hook up the fresh Freon bottle and let it pull the Freon into the system...
Remeber , you are loading the system with LIQUID... not gas... so the bottle should be in the correct possition to enable liquid to be transfered.

Oct 06, 2010 | 1997 Cadillac Eldorado

1 Answer

When I turn on the air condition , its says very l...


reset computer unhook ground cable rehook . heater control should read auto two times.

May 20, 2010 | 1997 Cadillac Eldorado

1 Answer

How do you change the tempature reading for the air conditioner from Celsius to Farenheit?


You can switch the temperature mode between Fahrenheit to Celsius as follows:
While depressing the AUTO button, depress the OFF button for 3 seconds or more. The display will change from Fahrenheit to Celsius, or from Celsius to Fahrenheit.

Feb 03, 2010 | 2004 Kia Optima

1 Answer

My climate control only displays celsius temp. how do I change it


there should be a button on the dash that reads E/M, depress that button once and should go back to English.

Jul 08, 2009 | 1998 Pontiac Grand Prix

1 Answer

Reset Heating/ AIr cond temp display as well as EXT temp ????


the temp display can be switched between celsius and farenheit readings, since the car is from europe the default is celsius, The manual has instructions on changing back, You have to hold 2 buttons on the display per the manual.

May 07, 2009 | 2003 Land Rover Discovery

1 Answer

Climate controls are now in Celsius. HELP


On your DIC (driver information center) to the left you will see 3 buttons arranged vertically.
The ENG/MET button is used to switch between english and metric. Push that button until all displays are in english, that should return your climate control to fahrenheit.

Once you have completed that, push and hold the "reset" button down for 2 seconds ( button just below the ENG/MET button). That should reset you DIC to the default brightness as well as your other displays.

Give it a try and let me know.
Regards,

May 02, 2009 | 1998 Pontiac Grand Prix

Not finding what you are looking for?
2001 Porsche Boxster Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Porsche Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Dave  C
Dave C

Level 3 Expert

1050 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...