Question about 2007 Ford Focus 1.8
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have a mechanism failure on the changer which is preventing the mode of the function to return to the normal state. Hence the processor is giving out the error signal. First of all open the changer and ceck for mechanism damage. if not slowl try to rotate the load motor to return to the normal state and eject. now check the connections to the motor, the flexible line wiring may be defective. use a loop wire or test the continuity from the motor. if there is a rest switch use it for resetting, if not disconnect poweer nd power again. Some cd'smay be warped or damaged and causing to block the sensitive transport. remove of these cd's and testt again. if there is no motr drive at all then the IC of the motor drive has failed. clean and set back. hope this helps you. Good day
Posted on Jul 12, 2010
First try this,use a old cd,press and hold eject,try to insert gently under stuck cd
DO NOT PUSH FULLY IN,just lift stuck cd slightly
Keep trying this usually clicks release micro switch and works on all single cd players
If this does not work you could remove unit, and get your local auto electrician to check it out
Go to fitaudio.com for removal details,which is quite easy to remove
Posted on Feb 07, 2011
Tips for a great answer:
Sep 22, 2012 | 2007 Ford Focus (3 Door) Hatchback
Oct 01, 2011 | 2003 Ford Focus
Sep 21, 2011 | 2005 Ford Focus
Feb 07, 2011 | 2005 Ford Focus
Apr 30, 2009 | 2007 Ford Focus (3 Door) Hatchback
Jun 09, 2017 | 2007 Ford Focus 1.8
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: