Question about 2004 Chrysler 300M
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There will be a few minor differences between the 2000 and 2004, but for the most part, you can use the 2004 manual as a reference. Since it is illustrated, you can confirm visually when you are taking on repairs. I have owned a 2000 300m for several years. Might I recommend you visit 300mclub.org? I am a member there and have learned a ton about 300m's.
Posted on Jun 25, 2009
Yes the water pump does run of the timing belt system.
Directly from the service manual:
The 3.5L water pump has a die cast aluminum
housing and a plastic swept vane impeller. It bolts
directly to the right rear timing belt cover using an
O-ring for sealing. The water pump is
driven by the engine timing belt.
The water pump on all models can be replaced
without discharging the air conditioning system.
WARNING: DO NOT REMOVE PRESSURE CAP
WITH THE SYSTEM HOT AND UNDER PRESSURE
BECAUSE SERIOUS BURNS FROM COOLANT CAN
NOTE: It is normal for the water pump to weep a
small amount of coolant from the weep hole (black
stain on water pump body). Do not replace the
water pump if this condition exists. Replace the
water pump if a heavy deposit or a steady flow of
engine coolant is evident on water pump body from
the weep hole (shaft seal failure). Be sure to perform
a thorough analysis before replacing water
(1) Drain cooling system (Refer to 7 - COOLING -
(2) Remove accessory drive belts (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
NOTE: The water pump is driven by the timing belt.
(3) Remove engine timing belt (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT AND
SPROCKETS - REMOVAL).
(4) Remove water pump mounting bolts (Fig. 31).
Note position of longer bolt for proper re-installation.
(5) Remove water pump body from engine
Here is link to get a factory service manual relatively cheap.
2004 Chrysler 300M Service Manual Covers every serviceable part.
Posted on Sep 27, 2009
under the glove box,pull out plastic push pin holding plastic duct work and remove duct piece,three screws holding blower motor cover,remove them,then disconnect blower motor wires at connector,remove three screws holding motor up in place.
watch the mice don't fall on you!
Posted on Dec 08, 2009
Tips for a great answer:
Apr 14, 2016 | 2003 Chrysler 300M
Nov 29, 2014 | 2004 Chrysler 300M
Dec 01, 2013 | 2004 Chrysler 300M
Sep 30, 2012 | 2004 Chrysler 300M
Sep 15, 2011 | 2004 Chrysler 300M
May 28, 2011 | 2004 Chrysler 300M
Sep 27, 2009 | 2004 Chrysler 300M
Aug 25, 2009 | 2004 Chrysler 300M
Jul 30, 2009 | 2004 Chrysler 300M
Mar 09, 2015 | 2004 Chrysler 300M
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: