Question about 1994 Chevrolet K1500
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I figured out my problem!
From the VERY BEGINING... I changed my brake pedal switch with a BRAND NEW switch, and the lights still didn't work.
Well, I went back down there with a live wire and touched the contacts..and guess what.. the brake lights lit up!
I got a faulty NEW brake pedal switch!! I went a year with this problem, so learn from my issue, test even your new parts if it doesn't fix the problem to completely rule it out!
I hope you guys figure out what's going on with your issue.
Posted on Apr 21, 2009
o2 sensors are located on the header pipe and on the catalyctic conververter on some vehicles. Spray with wd40 or the like before unscrewing it.
Posted on May 23, 2009
open the intake manifold by removing the air cleaner and or hose look on the back side of the plate to see if there is varnish and gum if there is you need to do a top engine clean, You must understand that running that kind of gas will cause varnish and carbon buildup on the pistons and valves. This causes the knock sensor to not to be able to adjust for compression change. It can only advance the timing 50% once the carbon build up is to much it will start knocking. If you want to receive instructions on how to fix this then rate me post a comment and I will give you the two page answer on how to do this. Unless you want to keep buying parts. your choice. I will no longer post it here as I see some think they can just take my answers and copy them.
Posted on Aug 31, 2009
Take the bolts out that attach the steering box to the frame and pivot the box so you can fit the puller on.
Leave the steering shaft and power steering hoses attached.
Mark the new pitman arm and old one in the same place and mark the pitman shaft to keep the same position of the new pit man arm on the old shaft as the old pitman arm.
Posted on Sep 06, 2009
check the repair manuals section at your local parts store. The manual on that vehicle should have your diagram in it
Posted on Oct 11, 2009
Testimonial: "Thank you. Was hoping for a link since I can not get to the shop, and do not have working lights...no tickets...you know!"
Tips for a great answer:
Nov 19, 2015 | Chevrolet Silverado 1500 Cars & Trucks
Dec 04, 2013 | 1999 Chevrolet Silverado 1500
Aug 10, 2012 | 1992 Chevrolet K1500
Oct 15, 2010 | 1997 Chevrolet C1500
Nov 08, 2009 | 1998 Chevrolet K1500
Jun 13, 2009 | 1994 Chevrolet K1500
Apr 17, 2009 | 1996 Chevrolet K1500
285 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: