Question about 2005 Chevrolet Suburban
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is a specialist job These things are very dangerous if you don't know what you are doing! Sounds like it has a fault Don't try playing with it !!!!!
Posted on Jul 10, 2009
These codes are for the evaporative emission system.The 455 is the vent solenoid.The 455 is a large leak in the evap.system.The vent solenoid I would replace because they go bad and will not work because they are under the vehicle in the rear of the truck.There is a bulletin for these and the vent valve is installed in another spot.The number for the bulletin is 02-06-04-037E.You should also look for a broken or loose hose or pipe that might have came off.Specially if you ran over something.If none found it could just be the vent solenoid stuck in the venting position.Good luck.
Posted on Dec 01, 2009
sometimes the vacuum line going to the actuator cracks.this will cause the diaphram in the actuator to not depress fully. you should be able to press in the diaphram by hand easily,if you cant,then the actuator is bad...usually due to debri getting into it,or from non use.
Posted on Apr 29, 2010
Tips for a great answer:
Feb 11, 2015 | 2006 Chevrolet Tahoe
Sep 21, 2012 | Cars & Trucks
Feb 19, 2011 | Chevrolet Tahoe Cars & Trucks
Nov 24, 2010 | 2004 Chevrolet Tahoe
Apr 29, 2010 | 2006 Chevrolet Tahoe
Mar 15, 2010 | 2004 Chevrolet Tahoe
Sep 26, 2009 | 2006 Chevrolet Tahoe
Jul 10, 2009 | 2006 Chevrolet Tahoe
May 23, 2009 | 2000 Chevrolet Tahoe
May 22, 2014 | 2005 Chevrolet Suburban
126 people viewed this question
Usually answered in minutes!