Question about 1995 Chevrolet Blazer

1 Answer

Freezeplugs!!! i have a freezeplug that is rusted out. its on the passenger side . but wen me and my step dad looked at it. the water is comming from right behind the motor mount on the passenger side. what i would like to know . is there a freezeplug right behind the motor mount? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Not supposed to be But, Check it out anyway. Hopefully it is not a Cracked Block!!!!

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Could a freezeplug blow out?


freeze plugs ( welsh plugs ) rust out and will leak water under pressure . they are replaceable with some difficulty-- working space required
water pumps will leak out a small hole under the housing behind the pulley to stop the leaking pump seal from putting water into the bearing-- replace is the only real fix as reconditioning is almost as expensive as a new pump
to find the leak have a pressure test done on the cooling system as it reveal where the leak is
if you have plastic radiator tanks then they are known to crack or even come loose of the cores
a pressure test will reveal all this

Aug 28, 2015 | 2001 Ford Escape

1 Answer

Rear freeze plug location


without knowing the year, make or model, ill give a few examples:

887f5f05-26f9-42c0-83c8-5a8aee2bb3c9.jpg

ecefb945-e82e-45e5-be2b-94ebfa0e3c96.jpg

sometimes to replace the rearmost freezeplugs, head or engine must be removed. Lots easier to make sure you got proper coolent. Freeze plugs are on the sides as well as the back, and some are actually behind the flyweel, ouch!

Dec 08, 2013 | Cars & Trucks

1 Answer

Freeze plug above motor mount on a 4.3 g20 van


need to unbolt both motor mounts taking the big center bolt out on both sides..raise the engine with a floor jack enough to acess the faulty freezeplug with a tool from autozone..you hit the tool with a hammer and push it into the block, then once loosened, remove with a pair of channel lock pliers then replace the new freezeplug carefully..these are a one time install piece so be careful to put it in straight..lower the engine back onto the mounts reinstall the bolts and fill and check everything..

Feb 09, 2013 | 1985 Chevrolet Chevy

2 Answers

Having water leaks from back passenger side of motor


check for blocked drain holes under bonnet....look for water building up in anything that will hold water...if water is found pooling....clear drain hole

Feb 07, 2013 | 1991 Ford LTD Crown Victoria

1 Answer

Oil mixed with water


this may be pricey to fix some models had an external oil cooler in the radiator as with automatic transmission lines, others had one in the block itself..they were steel lines subjected to vibration and rust..only other thing I know is maybe a failed freezeplug under the valvecover somewhere or in the inake assembly..ultimately you may have a cracked casting somewhere and those arent easy to find.. good luck

Jan 13, 2013 | 1994 Mercury Grand Marquis

1 Answer

Freeze plup location


Back of engine, eh? The freeze plugs (3, maybe 4 on that back side) will be on the engine block, below the cylinder head, and below where the exhaust manifold mounts up. Look in back of the exhaust manifold for the plugs. Check for indication of leaking, it should be evident. If you have an engine block heater installed in one of the freeze plug holes, that may have loosened and started leaking. If you find a plug that needs replaced, put a stout screwdriver or punch on the freezeplug, not at the center of plug but to the edge, and whack it good. That edge will go in and the other side will stick out- grab with pliers and remove. Clean the area well to remove rust and scale where freezeplug seals in the block. It will be hard, possibly, to put in a new freeze plug with everything in the way. So buy a rubber expansion plug at the parts store-easy to install, just put a wrench on it to tighten. Take your old freezeplug with you to get the right sized expansion plug.
Good luck, hope you find it.

Dec 23, 2012 | 2006 Scion tC

1 Answer

Leaking water at the front of engine, can't see if it is a freezeplug or maybe the water pump


9 times out of 10 its a leaking water pump they will go out before the freeze plugs give you any problems.

Dec 10, 2010 | 1999 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...