Question about 1994 Ford F150 Styleside Supercab

1 Answer

Abs/brakes when im driving my truck my abs and brake light comes on right away. then when i keep driving it my clutch gets real loose and my brakes get real stifff and lock up. when i pull over and let it cool down for about an half hour or so, there ok for just a little bit then the same problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

That is caused by a Faulty Brake Master Cylinder.

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the Emergency Brake light to not go off when the emergency light is released? What causes the ABS warning light to come on?


When I had that problem with the emergency light it was the sensor for emergency brake
The abs and brakes sounds like you are loosing pressure in the system

Apr 18, 2015 | 2004 Toyota Prius

2 Answers

Why is the abs light in my 1994 camero stuck on is it serious


HELLO,IS YOUR ABS STILL WORKING..TEST BY DRIVING ON SOME DIRT,APPLY BRAKES HARD.IF PEDAL PULSATES AND KEEPS TIRES FROM SKIDDING THAN ABS IS WORKING..AND YOU HAVE A BAD SENSOR ON ONE OF YOUR WHEELS..OR IT COULD MEAN TIME FOR A BREAK JOB..BUT YOUR BREAKS AREN'T NOTHING TO TAKE LIGHTLY SO GO GET THEM CHECKED BY A PROFESSIONAL..ASAP..

Feb 22, 2015 | Cars & Trucks

1 Answer

Proton Savvy 1.2 2008. Following a service the ABS and Brake light keep coming on? No fluid loss and brakes seem fine. Can anyone advise please?


-You're okay to drive. Just quick check if the brake fluid is full or not.
If Not then top it to full line. Even the ABS is not working, the basic
brake still work as regular car.

Good Luck

Mai Lor

Oct 29, 2014 | Cars & Trucks

1 Answer

Stabilitrak and ABS lights come on but car is running fine


Nope, but take it in. Brake problems are nothing to fool with They'll probabl tell you it's the ABS ECU. Not a cheap item.. However, it only affects the ABS system, not the brakes itself.

Jan 16, 2013 | 2008 Pontiac Torrent

1 Answer

1999 Chevy Silerado ABS & Brake warning lights come on and stay on Restart Engine and lights disapear sometimes during a drive the will both reapear (alway all 3 indication lights) the ABS and...


The only real way to find out what is going is to have a diagnostic scan. You can go to auto zone and have it scanned for free but im pretty sure their scanners are for motor only, not abs. You need an abs scanner. Any garage should be able to scan. It could range in cost from$35 to$100 for a scan. Abs light could be a as simple as wheel sensor. The brake warning concerns me though. I would check your brake fluid. When was the last time you had new brake pads put on. You may have worn the pads so low, you have run down the brake fluid.i wouldnt drive until i found out what is going on with the brakes. any other help needed, just ask.

May 20, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

ABS light intermittant, groaning noise


a sensor on one of the axles may have come loose & is being ground away!!
urgent inspection needed!!!
Cheers Rob

Aug 15, 2009 | 1994 Mazda 626

1 Answer

Traction conrtol , abs brake lights lincoln ls 2000


it might be a loose abs cable behind one of the brakes?

Jul 27, 2009 | 2000 Lincoln LS

1 Answer

2003 Sonoma SLS 6 cylinder 4.3L ABS issue


I WOULD NOT KEEP DRIVING IT.WHEN ABS LIGHTS AND BRAKE LIGHTS COME ON.YOU HAVE BRAKE FAILURE. TOW IT TO DEALERSHIP HAVE IT SERVICE.AND CHECK THE ABS BRAKES SYSTEM .BECAUSE ABS BRAKE SYSTEM IS NOT A HOME FIX.BECAUSE THE ABS HYDRAULIC MODULATOR UNIT HAS LOWER FROM HOME POSITION .IN ORDER TO MOVE THE MASTER CYLINDER FROM UNIT.YOU NEED A TECH 2 SCANNER TO DO THE JOB.TO GET ABS BRAKES TO BLEED RIGHT BEST TO GET THEM PRESSURE BLEED INSTEAD OF MANUAL BLEEDING GET LESS AIR IN SYSTEM.THAT WHY SEE DEALER SHIP HAS THE THINGS TO DO THE JOB.

Jun 06, 2009 | 2003 GMC Sonoma Extended Cab

1 Answer

2004 chevy cavalier


Take your vehicle in immediately. If this many lights are coming on, it could be a problem with the computer. Worse yet, it could mean:
1) your ABS isn't working
2) you could have serious engine problems
3) You could loose your braking

The brake light comes on for two reasons - the e-brake is on, or there is a problem with the braking system. If your e-brake is off, worry.

Drive slowly to a repair shop you trust and get diagnostics run on it. Go from there.

I hope for your sake it's just a small problem.

Good Luck,
Hope this helps 2 Pts Rate Answer

Jun 23, 2008 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...