Question about Mazda B3000

2 Answers

My 1994 Mazda b3000 p/u died on me while i was driving. Has gas, new filter, and does crank but wont start. Need help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Does the electric fuel pump come on when you turn the key? It should make a buzzing noise for 3 seconds or so.

Posted on Jan 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Does your truck have a fuel safety switch? I have a 2005 Mazda B300 P/U and the truck died on me while I was driving, it cranked but wouldn't start, had a full tank of gas etc....After having it towed to the house, replacing relays, and only God knows what else, I found out there is a fuel shut off located in the gas tank that will shut the truck down if you hit something (my son borrowed my truck and didn't tell me he ran over a huge curb in the Walmart parking lot). I had to reset the fuel safety shut off switch. Press the button, turn the ignition on and off 3 times (do not start), push the button again wait 5 seconds turn the ignition on and off again another 3 times (engages the fuel pump located inside the gas tank) then push the button one more time, turn ignition once wait 5 seconds and start the truck.

Posted on Sep 13, 2013

  • Dmoore
    Dmoore Nov 14, 2013

    Yes fuel pump is heard. Shut off button not tripped

  • Kim Linder
    Kim Linder Dec 04, 2014

    Mines 94,, I have a switch like that but uits not in the tank. its on the fire wall passenger side.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know what 5 speed transmissions will interchange with a 92 ranger with a 3.0


You didn't mention if it was 2 or 4 wheel drive so I went with a 2 wheel drive. According to hollander the 5 speed transmaaion fits a ranger (2WD) 1991 - 1994 and a Mazda B3000 1994 only. Hope this helps.....

Oct 29, 2012 | 1992 Ford Ranger

1 Answer

All my Dodge 1994 Intrepid does is crank.


ON MINE THE CRANK CASE SENSOR LOCATED IN FRONT OF ENGINR BELOW WATER INLET

Jun 04, 2012 | 1994 Dodge Intrepid

1 Answer

I have a 94' Chysler Newyorker, and when i go to start it or give it gas it either dies or trys to die. When in drive the RPM wont go over 1-1 1/2 &MPH wont go over 20. When in Neutral or Par


You replaced all those sensor,Your problem is mechanical, The timing may have slipped.If the timing belt is good and all on the mark,how the crank position sensor, The crank get its signal from the transmission flywheel,if the flywheel is cracked and lost its position then it does exactly what you describe . You either have a cracked flywheel or a jumped timing belt.The exhaust can be plugged also

Mar 19, 2012 | 1994 Chrysler New Yorker

1 Answer

Cranks over fine but wont start in cold unless plugged in for at least 20 minutes. It used to when I first got it.


You need a very good tune up, plugs, wires, distributor cap and rotor, even a new coil would be good.

not to mention gas and air filtre

gas line antifreeze in your gas tank would help a lot too.

Dec 16, 2010 | 1994 Mazda 2WD B Series Pickup

1 Answer

94 mazda B3000 3.0L cylinder head torque specs


Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Sep 17, 2009 | 1994 Mazda 2WD B Series Pickup

1 Answer

How many quarts of oil do i need for an oil change on a 1994 Mazda B3000?


I believe that's the same engine as the Ford Ranger. It should take 5 quarts with filter changed.

May 02, 2009 | Mazda B3000 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...